[Xastir] UGH!!! Shapefiles?

[Gerry Creager]

The compilation and loading sequence of the ancillary libraries is 
everything, with the geospatial libs.  Recheck the sequence in the 
README.1st (I think) and make sure you've got everything there.  Then 
make sure, pre-'./configure' that you've removed config.cache.

gerry

Scott Clark wrote:
> I'm a Linux engineer by trade - and strangely, I'm having the hardest time
> getting Xastir to work properly!!
> 
> Started with Red Hat 8.0 opn my laptop running smoothly.  Had so much
> trouble with gcc (not just xastir - but LOTS of source code) that I reverted
> to a fresh 7.3 installation.
> 
> I get version 1.3 to compile fine - except the configure script says "NO" to
> building with shapelib support.  Strange, because I've compiled shapelib,
> made sure the library paths are correct & available, yet the Configure
> script flies right on by.  Figuring maybe the config script was as out of
> date as much of the documentation, I ran xastir and discovered the Shapelib
> support did not make it into the build.
> 
> So I downloaded the mandrake RPM of 1.1.  It installs and runs fine!  I go
> to Map Chooser, there's my maps that I got from ESRI - I choose one, or two,
> or three, and I get the "Loading Maps" message.  And I'm returned to a nice
> blank grid.  What am I missing?  Iv'e read every piece of documentation I
> can find on xastir, searched for a good 4 hours on Google for similar
> complaints.  I'm a HUGE fan of open source and have never been this
> confounded by unclear documentation in my life!
> 
> I nkow that xastir's a good program - I've used a non-shapelib version for
> months at home with my Peet Bros. U2000 weather station.  Right now I've got
> a TNC & Radio sitting waiting on me to be able to get Shapelib support so I
> can finish my workstation.  I also chase balloons for NSTAR in Nebraska and
> that's why I need the shapelib support.
> 
> Can anyone offer some advice before I have to revert to the worst operating
> system in the world?!?!?!?!?  
> 
> 
> H E L P!!
> 
> Scott - KC0MTH
> 
> Scott D. Clark
> Director, Systems Engineering
> SITEL Worldwide
> (402) 963-6340
> scott.clark at sitel.com
> 
> 
> 
>>This message and any attachments are intended only for the use of the
>>addressee and may contain information that is privileged and confidential.
>>If the reader of the message is not the intended recipient, or the
>>authorized agent of the intended recipient, you are hereby notified that
>>any dissemination of this communication is strictly prohibited.  If you
>>have received this communication in error, please notify SITEL immediately
>>by telephone at 402.963.6001 and delete the message and any attachments
>>from your system.  Thank you for your cooperation.
>>
>>
> 
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> http://krypton.hscs.virginia.edu/mailman/listinfo/xastir


-- 
Gerry Creager -- gerry.creager at tamu.edu
Network Engineering -- AATLT, Texas A&M University
Office: 979.458.4020  FAX: 979.847.8578
Cell: 979.229.5301    Pager: 979.228.0173