[Xastir] Creating Object. Problem solved

[Jim]

Mystery solved!
I updated my LessTif to 0.93.41-1 and the Icon selection works correctly.
Thanks for the help

Jim, n5zxd
----- Original Message -----
From: "Jim" <meyer at myfamily.org>
To: <xastir at krypton.hscs.virginia.edu>
Sent: Thursday, March 27, 2003 7:40 AM
Subject: Re: [Xastir] Creating Object.


> I did another test and here were the results this morning:
>  I started the Create object dialog
>     picked the first Icon from the primary table
>     gave the object the name "new"
>     pressed the Create New Object button
>
> Results:
>     No object appeared at the location
>     The object was in the view own object list
>         Call sign: new, #Pack: 2 (I have transmit objects disabled), Pos
> Time: blank,Path:APX114,WIDE,WIDE2-2,PHG: blank,Comment: 1.71W
>     No object was found when I searched for "new"
>
> When I do the same but put a space into the symbol character the object
> creates correctly.
>
> This is different then some of the results I got yesterday so I'm guessing
> that these results are somewhat random.
>
> Jim, n5zxd
> ----- Original Message -----
> From: "Gerry Wheeler" <gwheeler at vmguys.com>
> To: "Curt Mills, WE7U" <hacker at tc.fluke.com>
> Cc: "Xastir" <Xastir at krypton.hscs.virginia.edu>
> Sent: Thursday, March 27, 2003 6:13 AM
> Subject: Re: [Xastir] Creating Object.
>
>
> > On Wed, 2003-03-26 at 14:06, Curt Mills, WE7U wrote:
> > > Yea, be bring up the exact same dialog for both Object/Item and
> > > Station icon selection.  If the problem exists in one place, it
> > > likely exists in the other place as well.
> >
> > I just ran a test trying to create an object/item. I pressed the Select
> > button to bring up the icon grid. If I select any icon from the left
> > side of the grid, the "group/overlay" character is set to '/' and the
> > "Symbol" character is set to ' ' (space). If I select any icon from the
> > right side of the grid, the characters are set to '\' and ' '.
> >
> > I'm running RH8.0, and a CVS version from a week or so ago. Are there
> > any debug statements in that section of code I can turn on? (Which
> > module is that code in, anyway. I could look for myself.)
> > --
> > Gerry Wheeler      KG4NBB
> > VM Systems, Inc.   +1 239 596 2480 x24
> > Naples, FL 34109   gwheeler at vmguys.com
> >
> > _______________________________________________
> > Xastir mailing list
> > Xastir at xastir.org
> > http://krypton.hscs.virginia.edu/mailman/listinfo/xastir
>
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> http://krypton.hscs.virginia.edu/mailman/listinfo/xastir