[Xastir] Argh! make problems

[Gerry Creager N5JXS]

OK:  Looks like a pthreads problem, but I'm neither sure nor coherent 
enough tonight to debug without help.

The last little bit of compile before the failure looks like this:

gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i386 -mcpu=i686 -Wall 
-I/usr/include -I/usr/include/freetype2 -D_FILE_OFFSET_BITS=64 
-D_REENTRANT -I/usr/X11R6/include -I/usr/include/libxml2 -g -pthread 
-pipe -c xa_config.c
gcc -DHAVE_CONFIG_H -I. -I. -I..     -O2 -march=i386 -mcpu=i686 -Wall 
-I/usr/include -I/usr/include/freetype2 -D_FILE_OFFSET_BITS=64 
-D_REENTRANT -I/usr/X11R6/include -I/usr/include/libxml2 -g -pthread 
-pipe -c snprintf.c
gcc  -O2 -march=i386 -mcpu=i686 -Wall -I/usr/include 
-I/usr/include/freetype2 -D_FILE_OFFSET_BITS=64 -D_REENTRANT 
-I/usr/X11R6/include -I/usr/include/libxml2 -g -pthread -pipe -pthread 
-o xastir  alert.o bulletin_gui.o color.o datum.o db.o draw_symbols.o 
fcc_data.o festival.o gps.o hostname.o igate.o interface.o 
interface_gui.o lang.o list_gui.o locate_gui.o location.o location_gui.o 
main.o maps.o messages.o messages_gui.o popup_gui.o rac_data.o rotated.o 
sound.o track_gui.o util.o view_message_gui.o wx.o wx_gui.o xa_config.o 
snprintf.o  -lshp -lgeotiff -lproj -lXpm -lXp  -lXm  -L/usr/X11R6/lib 
-lSM -lICE -lXt -lX11 -lXext  -lm -lax25 -lXpm -ltiff  -lMagick -llcms 
-lfreetype -lXext -lSM -lICE -lX11 -lbz2 -lz -lpthread -lm
/usr/bin/ld: cannot find -llcms
collect2: ld returned 1 exit status
make[2]: *** [xastir] Error 1
make[2]: Leaving directory `/home/gerry/homedirs/gerry/xastir/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/gerry/homedirs/gerry/xastir'
make: *** [all-recursive-am] Error 2

./configure claimed to find everything save GPSMAN, which is there, but 
not called out in my configure instance.

/etc/ld.so.conf looks like this:

[gerry at home xastir]$ cat /etc/ld.so.conf
/usr/kerberos/lib
/usr/X11R6/lib
/usr/lib/qt-3.0.5/lib
/usr/local/lib
/lib/tls
/lib
/usr/lib
/usr/libgeotiff-linux-bin.1.1.4/lib
/usr/lib/sane
/usr/lib/qt-3.1/lib

and, yes, it's had /sbin/ldconfig run against it.

I'm open to suggestions.  I'll be sitting here trying to get pxe-boot 
running on this silly box tonight, too.

TIA, guys!
gerry

-- 
Gerry Creager -- gerry.creager at tamu.edu
Network Engineering -- AATLT, Texas A&M University	
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.847.8578
Page: 979.228.0173
Office: 903A Eller Bldg, TAMU, College Station, TX 77843