[Xastir] tnc's name

[Massimo Corinaldesi]

Brilliant solution as solves my needs with minimal effort ! I tried it and 
works. Thanks.

Your assertion about 6pack is interesting too: I have two opened tncs, so I 
must learn the behaviour of 6pack eproms. I'll do.

73 Henk

        Massimo  I0MCF


Alle 15:15, mercoledì 26 novembre 2003, Henk de Groot ha scritto:
> At 06:59 25-11-2003 -0800, Curt Mills, WE7U wrote:
> > > Yes, I'm using only serial tncs. But reading kernel configuration info
> >
> > seems
> >
> > > the ax25 are installed by default but as modules. So must be activated.
> >
> >Correct.  At least that's the usual way to do it.
>
> What maybe a semi-working solution for now (without using MKISS and AX.25)
> is to use different tty ports of the different TNCs so the interfaces look
> different that way...
>
> If you serial port is /dev/ttyS0 and tou have a KPC3, AEA and MJF modem you
> could make symbolic links from /dev/ttyS0 to /dev/KPC3, /dev/AEA and
> /dev/MJF and use those devicenames in the interface specification. Then you
> know which interface is used and which initialisation file is run on the
> TNC.
>
> Not a brilliant solution but it looks like it could work to me. One gotcha,
> I have not tested this...
>
> Kind regards,
>
> Henk.
>
> P.S. 6pack can be daisychained, however you need to have 6pack in every
> TNC. With closed-source TNCs that may not be possible.

-- 

--->   Massimo Corinaldesi I0MCF
       http://www.ziomassimo.it