[Xastir] serial port error with serial GPS

Jerry Chamberlin jerryc at netlab.org
Sun Feb 29 18:21:26 EST 2004


I correct myself, I used to download it from there, It Was UNIV of Columbia,

ANyone for a Bardot link ?

On Sun, 29 Feb 2004, Jerry Chamberlin wrote:

> Univ of Oklahoma.
> Use over ascii text link to send binaries
> Last kow location Disney Land Future Center. 
> 
> On Sun, 29 Feb 2004, Brian D Heaton wrote:
> 
> > How about how many remember Kermit?
> > 
> > 			THX/BDH
> > 
> > 
> > On Sun, 2004-02-29 at 17:06, Gerry Creager N5JXS wrote:
> > > This is a test.  How many on this list remember what 'uucp' means/meant?
> > > 
> > > gerry n5jxs
> > > 
> > > Curt, WE7U wrote:
> > > > On Thu, 26 Feb 2004, Amanda K. Martino wrote:
> > > > 
> > > > 
> > > >>I have Xastir compiled with ImageMagick support on a P3 machine running
> > > >>Linux Red Hat 9. I've tried using both serial TNC and serial GPS with
> > > >>Xastir. Serial TNC works just fine. Serial GPS, however, gives me an
> > > >>"Error opening Interface 0. Hard fail" when I try to start the interface.
> > > >>I did run the chmod 4555 /usr/local/bin/xastir command when I compiled
> > > >>Xastir, and my procedure for starting up Xastir is as follows:
> > > >>login to linux as user capstone
> > > >>su to root
> > > >>xastir & from a terminal window as root.
> > > > 
> > > > 
> > > > Once you've done the "chmod" command, it allows Xastir to gain root
> > > > priviledges when it needs to, such as when opening ports.  You don't
> > > > need to "su" in order to run Xastir, and in fact it's not
> > > > recommended because then when Xastir tries to drop priviledges when
> > > > it doesn't need them, you're still running as root.
> > > > 
> > > > I'd run Xastir as the "capstone" user.
> > > > 
> > > > 
> > > > 
> > > >>I don't see how it could be a permissions problem, but as I'm new to
> > > >>Xastir I don't have much to base that on except what I just described
> > > >>above. As mentioned before, serial TNC works perfectly fine. Does anyone
> > > >>have any suggestions as to what might be causing this? Thanks in advance
> > > >>for any help.
> > > > 
> > > > 
> > > > If you do an "ls -l /dev/ttyS?" you'll see the permissions and
> > > > user/group for your serial devices.  You are probably using
> > > > /dev/ttyS0 and /dev/ttyS1 for your ports, right?
> > > > 
> > > > In your /etc/group file, add your "capstone" user to whatever group
> > > > the serial ports belong to.  On my system it's the "uucp" group.
> > > > Change the permissions on the serial devices to 660 if they're not
> > > > already.  Mine look like this:
> > > > 
> > > > crw-rw----    1 root     uucp       4,  64 2003-10-02 13:45 /dev/ttyS0
> > > > crw-rw----    1 root     uucp       4,  65 2003-10-02 13:45 /dev/ttyS1
> > > > crw-rw----    1 root     uucp       4,  66 2003-10-02 13:45 /dev/ttyS2
> > > > crw-rw----    1 root     uucp       4,  67 2003-10-02 13:45 /dev/ttyS3
> > > > 
> > > > After that, you should be able to come in using the "uucp"
> > > > permissions as the "capstone" user, and run Xastir as the "capstone"
> > > > user as well.  Make sense?
> > > > 
> > > > Also make sure you have the case correct for the device name in the
> > > > Interface->Properties dialog for that interface.  You need a capital
> > > > 'S'.
> > > > 
> > > > --
> > > > Curt, WE7U			    archer at eskimo dot com
> > > > Arlington, WA, USA		http://www.eskimo.com/~archer
> > > > "Lotto:    A tax on people who are bad at math." -- unknown
> > > > "Windows:  Microsoft's tax on computer illiterates." -- WE7U
> > > > "The world DOES revolve around me:  I picked the coordinate system!"
> > > > _______________________________________________
> > > > Xastir mailing list
> > > > Xastir at xastir.org
> > > > https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
> > 
> > _______________________________________________
> > Xastir mailing list
> > Xastir at xastir.org
> > https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
> > 
> 
> The Net Lab year 2000 and beyond Internet Education is Science
> http://www.netlab.org
> WA0JRJ - Jerry
> used to be ICQ 6408731
> used to be AIM PappyJerry
> 
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
> 

The Net Lab year 2000 and beyond Internet Education is Science
http://www.netlab.org
WA0JRJ - Jerry
used to be ICQ 6408731
used to be AIM PappyJerry




More information about the Xastir mailing list