[Xastir] Still getting crashes

[Brian D Heaton]

Jack,

	Before I forget, did you ever do the memtest run?

			THX/BDH


On Fri, 2004-01-02 at 15:15, Jack Reilly wrote:
> Brian -
> 
> This morning Xastir showed a crash. I have 25 pages of data much of which is 
> the station listings and the alert/active series. I found no mutex message. 
> Here are the last lines of the output with the station list shortened:
> 
> APRS WX5 Peet Bros U-2k Packet (Packet mode): 
> |00000000014E000D----000086A00001----000100D700000000|
> decode_info_field: done = 1
> decode_info_field: ok_igate_net can be read 2
> decode_info_field: done with big switch
> decode_info_field: ok_igate_net start
> decode_info_field: done
> decode_ax25_line: exiting
> Found device error on port 0
> Channel data on Port 1 
> [N6RZR-2>APRS,N6RZR-3,WIDE3*:$ULTW00000000014E000D----000086A00001----000100D700000000]
> tnc_data_clean: called to clean 
> N6RZR-2>APRS,N6RZR-3,WIDE3*:$ULTW00000000014E000D----000086A00001----000100D700000000
> tnc_data_clean: clean result 
> N6RZR-2>APRS,N6RZR-3,WIDE3*:$ULTW00000000014E000D----000086A00001----000100D700000000
> decode_ax25_line: start parsing 
> N6RZR-2>APRS,N6RZR-3,WIDE3*:$ULTW00000000014E000D----000086A00001----000100D700000000
> c/p/i/o fr pt tp: Registering data N6RZR-2 APRS,N6RZR-3,WIDE3* 
> $ULTW00000000014E000D----000086A00001----000100D700000000  T 1 0
> decode_info_field: c:N6RZR-2 p:APRS,N6RZR-3,WIDE3* 
> m:$ULTW00000000014E000D----000086A00001----000100D700000000 f:T
> decode_info_field: Past check
> decode_info_field: ok_igate_net can be read
> decode_info_field: $ (raw gps or ultimeter 2000)
> data_add:
>         type: 13
>         call_sign: N6RZR-2
>         path: APRS,N6RZR-3,WIDE3*
>         data: 00000000014E000D----000086A00001----000100D700000000
>         from: T
>         port: 1
>         origin:
>         third_party: 0
> APRS WX5 Peet Bros U-2k Packet (Packet mode): 
> |00000000014E000D----000086A00001----000100D700000000|
> decode_info_field: done = 1
> decode_info_field: ok_igate_net can be read 2
> decode_info_field: done with big switch
> decode_info_field: ok_igate_net start
> decode_info_field: done
> decode_ax25_line: exiting
> Display File Start
> Display station (KC2ELS-9) called for Single=0.
> Display station (HNXW1230z) called for Single=0.
> .....................................................
> .....................................................
> Display station (K6EKB-5) called for Single=0.
> Display station (KC2ELS) called for Single=0.
> X Error of failed request:  BadValue (integer parameter out of range for 
> operation)
>   Major opcode of failed request:  56 (X_ChangeGC)
>   Value in failed request:  0x8d4
>   Serial number of failed request:  43277968
>   Current serial number in output stream:  43277973
> 
> I have saved all of the data and will resttart the xastir debug
> 
> Jack         aa6vn at pacbell.net
> 
> 
> On Wednesday 31 December 2003 19:12, you wrote:
> > Jack,
> >
> > 	That tells us that its not happening every time.  There is some set of
> > conditions that causes it, but its dependent on multiple variables.
> >
> > 	Hmm, can you send me the debugging output that precedes a crash/mutex
> > error?  I'm just interested in the last 50 lines or so before the crash.
> 
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
-- 
------------------------------------------------------------------
Brian D Heaton
Senior Network Engineer
Janus Research Group
(706) 364-9100
PGP Key Available