[Xastir] Filters?
Tom Russo
russo at bogodyn.org
Thu Jun 7 16:59:58 EDT 2007
On Thu, Jun 07, 2007 at 04:55:26PM -0400, we recorded a bogon-computron collision of the <kf4drr at windstream.net> flavor, containing:
> I've tried setting up some filters but was left feeling like i made a mistake
> in my setup.
>
> i tried m/160 (should work out to 100 miles from my location right?) in the
> filters box under interface > interface control > properties
>
> i set the port number to 14580 and waited.
>
> was left feeling like what i had done shut all traffic off from the igate. so
> i returned the default settings.
Did you set up your interface so that you transmitted your position to the
APRS-IS server? If not, it has no idea where you are and so can't tell you
when there is a station within 160km of you.
Check that your interface has "Allow Transmitting" turned on.
--
Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/
Tijeras, NM QRPL#1592 K2#398 SOC#236 AHTB#1 http://kevan.org/brain.cgi?DDTNM
"And, isn't sanity really just a one-trick pony anyway? I mean all you get is
one trick, rational thinking, but when you're good and crazy, oooh, oooh,
oooh, the sky is the limit!" --- The Tick
More information about the Xastir
mailing list