[Xastir] I must be missing something....

[Alex Carver]

I think part of the problem is layers.  You might want to tweak the layer numbers around.  It could be that one of your layers is obscuring the maps of the others.  I recall having this problem before but I don't remember the resolution and, at the moment, my Xastir machine is not running.  The choice of server won't matter at all.

--- On Tue, 6/23/09, Bill Ramsey <ka8wtk at ohio.net> wrote:

> From: Bill Ramsey <ka8wtk at ohio.net>
> Subject: [Xastir] I must be missing something....
> To: xastir at lists.xastir.org
> Date: Tuesday, June 23, 2009, 6:13 PM
> Ok,
> 
>   I have the county maps and the maps from the
> get-NWSdata script in the
> Counties directory. Shapelib library is installed. The
> configuration is to
> allow weather alerts. I am connected to an APRS server with
> no distance
> limits set and with the port filters set as t/n and t/w.
> Using debug level 6
> I can see, in the terminal, the alert_display_request. WMS
> radar is over
> laid on the map z_07my09.shp and displays properly.
> However, there are no
> warnings showing. There is nothing in View -> Weather
> Alerts.
> 
>   Looking at the NWS/SPC Watch, Warning, Advisory
> Display I can see all
> sorts of watches and warnings from the mid-west to the east
> coast. Sometimes
> a warning will show up, but only stays on the screen until
> the next
> "refresh" cycle when it goes away never to return even
> though the alert or
> warning is still active.
> 
>   The tier2 server I am using is first.aprs.net.
> Should I be using another
> for weather? It seems like I am missing something very
> fundamental in my
> setup that I don't recognize.
> 
>  
> 
> Thanks,
> 
>             Bill
> 
>   
> 
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>