[Xastir] TNC-X oddity

[Kai Günter Brandt]

On 01/10/2011 05:53 PM, Javier Henderson wrote:
> I finished building my TNC-X last night, and eventually got it to work with Xastir, but only after setting the jumpers on the TNC-X to the 9600 baud position, and setting Xastir to talk to the TNC at 9600 baud.
>
> I originally had everything set to use 1200 baud.
>
> Has anyone else seen this?
>
> 73,
> -jav w6vms
>
If it's working on 9600b why change to 1200?
The TNC is working at 1200b on air even if the comport is 9600.

I usually have jumper JP2 on to get 9600 for the COMport.

-- 
Kai Günter Brandt
LA3QMA