[Xastir] (no subject)

[John Ronan]

On 25 Jan 2011, at 13:55, Steve Rogers wrote:

> 
> I did open that interface as 0 first. Do I need to setup ax25 before open any interfaces in xastir. Steve
That depends

If you add a kiss interface directly in xastir, you don't

If you wish to share the AX.25 kiss device between multiple applications, then you will need to have axports properly populated, and kissattach running for each device

Regards
John
EI7IG

> 
>> Date: Tue, 25 Jan 2011 10:19:49 +0100
>> From: iz5fsa at gmail.com
>> To: xastir at lists.xastir.org
>> Subject: Re: [Xastir] (no subject)
>> 
>> have you connected ttyS0 before running ax25d ????
>> 
>> 2011/1/25 Steve Rogers <kd5mkv at hotmail.com>
>> 
>>> 
>>> Hello, I am having trouble with the AX25 kernel, I am running Ubuntu 10.4
>>> on xastir-2.0.1 (CVS). This is the errors:
>>> axconfig: port server not active
>>> ERROR: problem with axports file
>>> 
>>> ~$ ./ax25.up
>>> kissattach: device /dev/ttyUSB0 already in use
>>> I changed the name of the "aprs" to server. I am not sure how to "run"
>>> /sbin/update-modules. I believe I need to load this module to get kernel to
>>> work. (I am guessing here).
>>> Appreciate a hand, Xastir 2.0.1 works great by the way!
>>> Steve/kd5mkv
>>> 
>>> _______________________________________________
>>> Xastir mailing list
>>> Xastir at lists.xastir.org
>>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>>> 
>> 
>> 
>> 
>> -- 
>> 
>> *73s de Leo, IZ5FSA
>> *
>> _______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
> 		 	   		  
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir