[Xastir] TM-D710 startup file

[Stephen West-Fisher]

I just modified the 700 file and renamed it:

# $Id: tnc-startup.d700,v 1.11 2008/01/16 19:33:58 we7u Exp $
#
# Copyright (C) 2004-2008  The Xastir Group
#
# TNC Init file for KENWOOD D700.  Also reported to work with the
# Alinco DR-135TP radio (with the EJ-41U TNC which also uses a Tasco
# TNC just like the Kenwoods).  Perhaps works with the Alinco DR-635
# radio (with the EJ-50U TNC) too.
#
# NOTE:  TXD on a D700A is fixed at 500ms (1/2 second) in "APRS"
# mode.  In "packet" mode we can change the txd to other values.
#
#
#Don't send CONTROL-C before this line
##META <no-ctrl-c>
TC 1
##Pause for one second
##META <delay>
##META <delay>
#Put the TNC in packet mode since this is where we want to end up
# Change the 1 to 0 to go to normal radio mode
##META <no-ctrl-c>
TN 2
# Pause for two seconds
##META <delay>
##META <delay>
##META <delay>
##META <delay>
# Enable 4800 baud GPS
# Change to 2 for 9600 baud GPS
# Disable both the META line and the GU line for no change
##META <no-ctrl-c>
#GU 1
# Pause for two seconds
##META <delay>
##META <delay>
##META <delay>
##META <delay>
#Turn off Terminal Control
##META <no-ctrl-c>
TC 0
# Pause for two seconds just in case
##META <delay>
##META <delay>
##META <delay>
##META <delay>
HID off
#CWID off
#AWlen 8
MYCALL N4IK-5
UITRACE WIDE
BBSMsgs ON
B E 0
LOC E 0
Echo off
FLow off
AUTOLF off
MCOM off
MON ON
MRPt on
PACLen 128
PASSALL off
HBAUD 1200
TXDELAY 25
HEADERLN off
# Delete following lines if without GPS
#GBAUD 4800
#GPSTEXT $GPRMC
#LTMH OFF
#LTM 10
#

--
Stephen West-Fisher
N4IK

-----Original Message-----
From: xastir-bounces at lists.xastir.org
[mailto:xastir-bounces at lists.xastir.org] On Behalf Of Javier Henderson
Sent: Tuesday, March 08, 2011 8:05 AM
To: Xastir - APRS client software discussion
Subject: [Xastir] TM-D710 startup file

Greetings,

How are folks initializing their Kenwood TM-D710s for use with Xastir? Is
there a tnc-startup.d710 file somewhere?