[Xastir] Won't transmit anymore

[steve]

On 02/26/2012 09:45 PM, Javier Henderson wrote:
> I'm not sure what changed, because I don't remember changing anything, but for some reason Xastir is not transmitting anymore via the RF port.
>
> Received stations are decoded just fine, however.
>
> Clicking on "transmit now" shows the red arrows pointing to the right momentarily, data goes out to the APRS2 server, and the tnc.log file shows that I transmitted, but the radio never transmits.
>
> The TNC is a TNC-X, set at 9600 bps, the port definition on Xastir matches (and as mentioned, received data is being decoded), but the red light on the TNC-X never comes on.
>
> I tried deleting the port on Xastir and re-adding it, I also reloaded the FTDI device drivers, all to no avail.
>
> What am I missing?
>
> 73,
> -jav k4jh
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
>
Could a cable be loose? I have had the cable slightly loose after moving 
things around. Just a shot in the dark. Steve kd5mkv