[Xastir] process problem

[Liz]

On Sun, 22 Dec 2013 17:30:06 -0600
Steve Rogers <kd5mkv at hotmail.com> wrote:

> I recently installed xastir on raspberry pi via binary and remove it
> and installed cvs 2.0.5 version. When I  startup xastir it lags
> during map window and then freezes completely on weather alert maps
> and cpu is 100%. I look at Top and xastir cpu is 73-84%, my memory
> split is 256. Im not seeing any errors in the terminal. steve kd5mkv
> 
>  		 	   		  
>

I've just put the pi in service as Igate, using ax25 and aprx, and am
running a USB Lilliput monitor, LXDE and Xastir on that

top shows 

top - 08:54:19 up 35 min,  2 users,  load average: 0.09, 0.20, 0.15
Tasks: 105 total,   1 running, 104 sleeping,   0 stopped,   0 zombie
%Cpu(s): 11.9 us,  8.7 sy,  0.0 ni, 79.1 id,  0.0 wa,  0.4 hi,  0.0
si,  0.0 st KiB Mem:    221532 total,   209212 used,    12320 free,
14068 buffers KiB Swap:   262140 total,        0 used,   262140 free,
111128 cached


The only map I've got on the display is the worldhi.map at 200km shown
on the range.
I can see coastline and 2 major rivers, and honestly, I know where all
the fixed stations are, which is just as good as names on the map. This
map has no roads, so this wouldn't do for use in the car, but is fine
for the shack.

Liz
VK2XSE