[Xastir] I-gate setup

[Lee Bengston]

Hi David,

That's more than messages.  If it's OK in your area to gate beacons, etc.,
then aprsg is probably one of the better solutions.  See
http://blog.g4ilo.com/2010/12/aprs-gateway.html

Regards,
Lee



On Wed, Jun 11, 2014 at 5:25 PM, David <djmunn at bigpond.com> wrote:

> Hi Lee....im wondering if we are both thinking the same thing about
> "messages" that are gated by an I-gate
>
> the igate that VK4ZZ puts out takes the "beacons" that stations send to
> APRS-IS
> from within a radius of his station and retransmits them via RF to a local
> repeater which repeats them to the local area...his I-gate is down at the
> moment for repair and im attempting to provide backup in the meantime
>
> Aprsg is setup to do what his station does .....take the "beacons" from
> the Inet
> and send them out on RF to the repeater VK4RAT-3 ...its doing a very good
> job
> of it..
>
> the setup in Xastir or other igate software i havent found to do
> this....are they
> supposed to do it and if not why not
>
> 73 David VK4BDJ
>
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>