[Xastir] Xastir and Mobilinkd Tnc 1 Bluetooth tnc

[Bryan Irwin]

I had it working beautifully right up until a bug in Ubuntu took out the onboard wifi and bluetooth in the box.  I found that between 40% to 50% volume with the squelch set at one was the best combination for my setup.  

Now if I could figure out how to port Xastir to android.

> Date: Sun, 16 Nov 2014 18:07:05 -0800
> From: ksaves2 at sbcglobal.net
> To: xastir at lists.xastir.org
> Subject: Re: [Xastir] Xastir and Mobilinkd Tnc 1 Bluetooth tnc
> 
> Sometime this can be distro specific. Pairing the Mobilinkd hasn't been a problem
> The deal is getting the gain set for reception and such for a particular rig.  Kurt KC9LDH
> --------------------------------------------
> On Thu, 11/6/14, Bryan Irwin <kf5tot at outlook.com> wrote:
> 
>  Subject: [Xastir] Xastir and Mobilinkd Tnc 1 Bluetooth tnc
>  To: xastir at lists.xastir.org
>  Date: Thursday, November 6, 2014, 8:14 PM
>  
>  I'm looking for a little help
>  here.  I'm running Xastir 2.07 on Ubuntu 14.04 on a
>  Lenovo ideapad s10-3 and I want to use my Mobilinkd tnc with
>  it and I'm at a dead end.
>  
>  I can connect to the tnc in terminal using sudo rfcomm
>  connect 0 just fine but when I try to add it in the
>  interface control in xastir and start it I get an EACCESS
>  ERROR  Interface Error! Error opening interface 0 Hard
>  Fail.  I've tried the chmod command  and am still
>  in the same place.
>  
>  Any help would be greatly appreciated.
>  
>  Bryan
>  KF5TOT
>      
>          
>    
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir