[Xastir] EOC Network Setup - Forward over RF

[Neill Thornton]

All,

Now that I have solved my Ubuntu serial port problem, I wanted to bounce something off of the gurus....

I am looking to set up an EOC network with several Xastir workstations.  One of which will be the "bridgehead" station that has an RF interface, and the connection to the APRS internet servers.  That station has the server ports enabled, and "subordinate" stations would connect via IP to that machine.  So...

(RF Network  ) - (TNC) ---- \                              / (Private EOC Station)
(GPS Receiver)-------------- (Bridgehead Server) ----------- (Private EOC Station)
(Internet    )? - (NIC) ---- /                              \ (Private EOC Station)

So far, this seems to be working.  I get a data feed from the RF side and internet servers, to each of the EOC stations.  I can create stations and objects on the subordinate servers, and it gets rolled up into the bridgehead and forwarded on to the internet servers.

My problem is that it does not then transmit on the RF interface objects and stations that are created by the private workstations.  To clarify:

RF > TNC > Bridgehead > Internal Workstation    Works!
Internet > Bridgehead > Internal Workstation    Works!
Internal Workstation > Bridgehead > Internet    Works!
Internal Workstation > Bridgehead > TNC > RF    NOPE

I have Allow RF->Inet and Inet->RF Traffic selected for the TNC.?  Igate->RF Path is set to WIDE2-1.

How do I get my bridgehead machine to realize it should transmit new stations and objects sent by the internal workstations out over RF?

Thanks,

Neill