[Xastir] New Online Maps in Git (Canada & U.S.)
David A Aitcheson
david.aitcheson at gmail.com
Thu Aug 18 14:20:09 PDT 2016
See below.
On 08/18/2016 04:30 PM, David A Aitcheson wrote:
>
> Trying this route and well advise...
>
> Be aware that I am installing from source on a Ubuntu 14.04.4-LTS
> system and David Ranch is installing on a RedHat system as far as I
> can tell so this may be a two headed problem.
>
>
> On 08/18/2016 04:03 PM, km5vy Tom Russo wrote:
>> On Thu, Aug 18, 2016 at 03:17:49PM -0400, we recorded a bogon-computron collision of the <david.aitcheson at gmail.com> flavor, containing:
>>> On 08/18/2016 02:35 PM, km5vy Tom Russo wrote:
>>>> On Thu, Aug 18, 2016 at 11:06:08AM -0700, we recorded a bogon-computron collision of the <curt.we7u at gmail.com> flavor, containing:
>>>>> On Thu, Aug 18, 2016 at 10:57 AM, Tom Russo <russo at bogodyn.org> wrote:
>>>>>
>>>>>> Well, there go any theories I might have had. If your source is current,
>>>>>> you've bootstrapped, reconfigured, rebuilt, and reinstalled, all of those
>>>>>> files should have been installed with it. If it's not throwing errors at
>>>>>> "make install" time, then I am out of ideas for where to look.
>>>>>>
>>>>> I didn't go back and check every detail: Do you have wget or libcurl
>>>>> support, as well as either GraphicsMagick or ImageMagick support compiled
>> [... and maybe can't index...]
>>
>>>> Does /usr/local/share/xastir/maps/Online/nationalmap.gov exist? Are the
>>>> .geos in that directory?
>>> That directory DOES NOT EXIST on my system.
>> Then Curt's thought about the index isn't relevant to this.
>>
>>>> If so, then Curt may have hit the nail on the head, and your build is
>>>> missing something that display of these files requires. If not, then we still
>>>> have to figure out why the build system isn't getting them installed.
>>> Curt/Tom, Do either of you need a zip of my /home/david/src/Xastir/build
>>> directory or parts of it?
>> No.
>>
>>> build_ls.txt attached. NOTE that some files have not updated since
>>> first build in July under new Git sourced setup... Wondering if this is
>>> a smoke signal or the smoking gun?
>> I can't say, but let's get that out of the way. Perform a configure and build
>> in a completely fresh build directory:
>>
>> mkdir anewbuild
>> cd anewbuild
>> /path/to/Xastir/configure [options]
>> [etc.]
>>
>> If this still doesn't get you the installed nationalmap.gov stuff, then post
>> your anewbuild/config.log and anewbuild/Makefile
>>
>> This is an extremely puzzling problem. The presence of ancient files in your
>> build directory do make it sound like something that *should* have updated
>> didn't. Using a clean build dir will make sure we're not looking in the
>> wrong place for this problem.
>>
>
Requested files attached.
Steps taken are as follows:
> ls -laR > ../build_ls.txt
> 2001 ls -la
> 2002 mv build build_2016_Aug_10
> 2003 mkdir build
> 2004 ./bootstrap.sh
> 2005 cd ..
> 2006 cd -
> 2007 cd build
> 2008 cd -
> 2009 ../configure
> 2010 (make clean;make -j3 2>&1) | tee make.log
> 2011 sudo make install
> 2012 sudo chmod 4555 /usr/local/bin/xastir
> 2013 sudo chmod 4755 /usr/local/bin/xastir
> 2014 history
Another observation on my Ubuntu 14.04.4-LTS system...
In /usr/local/share/xastir/maps/Online/ the only files that updated are
the "OSM_tiled_*" files the others (Canada_* and US_NWS_Radar*) are
still dated July 26.
-------------- next part --------------
# Makefile.in generated by automake 1.14.1 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2013 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
#
# Copyright (C) 2000-2016 The Xastir Group
#
VPATH = ..
am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/xastir
pkgincludedir = $(includedir)/xastir
pkglibdir = $(libdir)/xastir
pkglibexecdir = $(libexecdir)/xastir
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
subdir = .
DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/config.h.in mkinstalldirs $(srcdir)/xastir.spec.in \
$(srcdir)/xastir-min.spec.in $(srcdir)/xastir-lsb.spec.in \
ABOUT-NLS COPYING compile config.guess config.sub depcomp \
install-sh missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = xastir.spec xastir-min.spec xastir-lsb.spec
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(countydir)" \
"$(DESTDIR)$(docdir)" "$(DESTDIR)$(fccdir)" \
"$(DESTDIR)$(gnisdir)" "$(DESTDIR)$(gpsdir)" \
"$(DESTDIR)$(mapdir)" "$(DESTDIR)$(onlinedir)" \
"$(DESTDIR)$(sounddir)"
NROFF = nroff
MANS = $(man_MANS)
DATA = $(county_DATA) $(doc_DATA) $(fcc_DATA) $(gnis_DATA) $(gps_DATA) \
$(map_DATA) $(online_DATA) $(sound_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
DIST_TARGETS = dist-bzip2 dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /home/david/src/Xastir/missing aclocal-1.14
ALLOCA =
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AUTOCONF = ${SHELL} /home/david/src/Xastir/missing autoconf
AUTOHEADER = ${SHELL} /home/david/src/Xastir/missing autoheader
AUTOMAKE = ${SHELL} /home/david/src/Xastir/missing automake-1.14
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -fopenmp -Wall -g -fno-strict-aliasing -fPIE -fstack-protector --param ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security -O2 -pthread -pipe -W -Wpointer-arith -Wstrict-prototypes -Wno-unused-parameter
CONTSHP =
CPP = gcc -E
CPPFLAGS = -I/usr/include/GraphicsMagick -I/usr/local/include -I/usr/include/gdal -DXASTIR_DATA_BASE=\"${datarootdir}/xastir\"
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
GMAGIC_BIN = /usr/bin/GraphicsMagick-config
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = -Wl,--no-keep-memory -L/usr/lib -fPIE -pie -Wl,-z,relro -Wl,-z,now -L/usr/lib/X11 -L/usr/local/lib -lgdal
LIBCOMPAT =
LIBOBJS =
LIBRTREE = -Lrtree -lrtree
LIBS = -lXm -lXt -lX11 -lGraphicsMagick -ljbig -llcms2 -ltiff -lfreetype -ljasper -ljpeg -lpng12 -lwmflite -lXext -lSM -lICE -lX11 -llzma -lbz2 -lxml2 -lz -lm -lgomp -lpthread -ldb-5.3 -lXpm -lrt -lXm -lXt -lXext -lm -lSM -lICE -lX11 -lcurl -lproj -lshp -lpcre -lax25 -lgdal
LIBSHP =
LN_S = ln -s
LTLIBOBJS =
LWPOSTGIS =
MAGIC_BIN =
MAKEINFO = ${SHELL} /home/david/src/Xastir/missing makeinfo
MKDIR_P = /bin/mkdir -p
MYSQL_CONFIG =
OBJEXT = o
PACKAGE = xastir
PACKAGE_BUGREPORT = xastir at xastir.org
PACKAGE_NAME = xastir
PACKAGE_STRING = xastir 2.0.9
PACKAGE_TARNAME = xastir
PACKAGE_URL =
PACKAGE_VERSION = 2.0.9
PATH_SEPARATOR = :
PG_CONFIG =
POW_LIB =
PTHREAD_CC = gcc
PTHREAD_CFLAGS = -pthread
PTHREAD_LIBS =
RANLIB = ranlib
SET_MAKE =
SHELL = /bin/bash
STRIP =
SUBRTREE = rtree
SUBSHP =
VERSION = 2.0.9
XMKMF =
X_CFLAGS =
X_EXTRA_LIBS =
X_LIBS =
X_PRE_LIBS = -lSM -lICE
abs_builddir = /home/david/src/Xastir/build
abs_srcdir = /home/david/src/Xastir/build/..
abs_top_builddir = /home/david/src/Xastir/build
abs_top_srcdir = /home/david/src/Xastir/build/..
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
convert =
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${prefix}/share/doc/xastir
dvidir = ${docdir}
exec_prefix = ${prefix}
festival = /usr/bin/festival
found_gdal_config = yes
gm = /usr/bin/gm
gpsman = /usr/bin/gpsman
gv = /usr/bin/gv
host = x86_64-unknown-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/david/src/Xastir/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lpr = /usr/bin/lpr
mandir = ${prefix}/share/man
mkdir_p = $(MKDIR_P)
mv = /bin/mv
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sed = /bin/sed
sharedstatedir = ${prefix}/com
srcdir = ..
sysconfdir = ${prefix}/etc
target_alias =
top_build_prefix =
top_builddir = .
top_srcdir = ..
wget =
xfontsel = /usr/bin/xfontsel
AUTOMAKE_OPTIONS = gnu dist-bzip2
ACLOCAL_AMFLAGS = -I m4
D = `date +%G%m%d.%H%M%S`
SUBDIRS = src m4 config help scripts symbols callpass
# Remove this file here (it is created via configure), not from within intl.
# DISTCLEANFILES = intl/libintl.h
EXTRA_DIST = xastir.spec.in xastir.spec xastir-min.spec.in xastir-min.spec config.guess config.sub install-sh \
missing mkinstalldirs placeholder FAQ LICENSE README README.GIT \
README.CYGWIN README.Getting-Started README.Contributing \
README.MAPS README.win32 README.OSM_maps README.sudo testdbfawk.1 \
DEBUG_LEVELS bootstrap.sh INSTALL UPGRADE callpass.1 xastir.1 xastir_udp_client.1 \
worldhi.map \
Davis LaCrosse \
OSM_template \
CC_OpenStreetMap_logo.png CC_OpenStreetMap_txt.png \
COPYING COPYING.LIB.LESSTIF AUTHORS
MAINTAINERCLEANFILES = configure aclocal.m4 Makefile.in Makefile \
config.guess config.sub install-sh missing mkinstalldirs \
xastir.spec xastir-min.spec
countydir = ${pkgdatadir}/Counties
county_DATA = placeholder
fccdir = ${pkgdatadir}/fcc
fcc_DATA = placeholder
gnisdir = ${pkgdatadir}/GNIS
gnis_DATA = placeholder
mapdir = ${pkgdatadir}/maps
map_DATA = worldhi.map CC_OpenStreetMap_logo.png CC_OpenStreetMap_txt.png
onlinedir = ${pkgdatadir}/maps/Online
online_DATA = OSM_tiled_cycle.geo OSM_tiled_mapnik.geo \
OSM_tiled_fosm.geo
gpsdir = ${pkgdatadir}/maps/GPS
gps_DATA = placeholder
sounddir = ${pkgdatadir}/sounds
sound_DATA = placeholder
doc_DATA = AUTHORS FAQ ChangeLog LICENSE README README.GIT README.CYGWIN \
README.MAPS README.win32 README.sudo COPYING INSTALL UPGRADE \
README.Getting-Started README.Contributing README.OSM_maps\
COPYING.LIB.LESSTIF
man_MANS = xastir.1 callpass.1 xastir_udp_client.1 testdbfawk.1
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
xastir.spec: $(top_builddir)/config.status $(srcdir)/xastir.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
xastir-min.spec: $(top_builddir)/config.status $(srcdir)/xastir-min.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
xastir-lsb.spec: $(top_builddir)/config.status $(srcdir)/xastir-lsb.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-man1: $(man_MANS)
@$(NORMAL_INSTALL)
@list1=''; \
list2='$(man_MANS)'; \
test -n "$(man1dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.1[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
done; }
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list=''; test -n "$(man1dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
sed -n '/\.1[a-z]*$$/p'; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-countyDATA: $(county_DATA)
@$(NORMAL_INSTALL)
@list='$(county_DATA)'; test -n "$(countydir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(countydir)'"; \
$(MKDIR_P) "$(DESTDIR)$(countydir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(countydir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(countydir)" || exit $$?; \
done
uninstall-countyDATA:
@$(NORMAL_UNINSTALL)
@list='$(county_DATA)'; test -n "$(countydir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(countydir)'; $(am__uninstall_files_from_dir)
install-docDATA: $(doc_DATA)
@$(NORMAL_INSTALL)
@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
done
uninstall-docDATA:
@$(NORMAL_UNINSTALL)
@list='$(doc_DATA)'; test -n "$(docdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
install-fccDATA: $(fcc_DATA)
@$(NORMAL_INSTALL)
@list='$(fcc_DATA)'; test -n "$(fccdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(fccdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(fccdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(fccdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(fccdir)" || exit $$?; \
done
uninstall-fccDATA:
@$(NORMAL_UNINSTALL)
@list='$(fcc_DATA)'; test -n "$(fccdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(fccdir)'; $(am__uninstall_files_from_dir)
install-gnisDATA: $(gnis_DATA)
@$(NORMAL_INSTALL)
@list='$(gnis_DATA)'; test -n "$(gnisdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(gnisdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(gnisdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gnisdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(gnisdir)" || exit $$?; \
done
uninstall-gnisDATA:
@$(NORMAL_UNINSTALL)
@list='$(gnis_DATA)'; test -n "$(gnisdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(gnisdir)'; $(am__uninstall_files_from_dir)
install-gpsDATA: $(gps_DATA)
@$(NORMAL_INSTALL)
@list='$(gps_DATA)'; test -n "$(gpsdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(gpsdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(gpsdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(gpsdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(gpsdir)" || exit $$?; \
done
uninstall-gpsDATA:
@$(NORMAL_UNINSTALL)
@list='$(gps_DATA)'; test -n "$(gpsdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(gpsdir)'; $(am__uninstall_files_from_dir)
install-mapDATA: $(map_DATA)
@$(NORMAL_INSTALL)
@list='$(map_DATA)'; test -n "$(mapdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(mapdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(mapdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(mapdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(mapdir)" || exit $$?; \
done
uninstall-mapDATA:
@$(NORMAL_UNINSTALL)
@list='$(map_DATA)'; test -n "$(mapdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(mapdir)'; $(am__uninstall_files_from_dir)
install-onlineDATA: $(online_DATA)
@$(NORMAL_INSTALL)
@list='$(online_DATA)'; test -n "$(onlinedir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(onlinedir)'"; \
$(MKDIR_P) "$(DESTDIR)$(onlinedir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(onlinedir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(onlinedir)" || exit $$?; \
done
uninstall-onlineDATA:
@$(NORMAL_UNINSTALL)
@list='$(online_DATA)'; test -n "$(onlinedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(onlinedir)'; $(am__uninstall_files_from_dir)
install-soundDATA: $(sound_DATA)
@$(NORMAL_INSTALL)
@list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(sounddir)'"; \
$(MKDIR_P) "$(DESTDIR)$(sounddir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sounddir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(sounddir)" || exit $$?; \
done
uninstall-soundDATA:
@$(NORMAL_UNINSTALL)
@list='$(sound_DATA)'; test -n "$(sounddir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(sounddir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS) $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(countydir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(fccdir)" "$(DESTDIR)$(gnisdir)" "$(DESTDIR)$(gpsdir)" "$(DESTDIR)$(mapdir)" "$(DESTDIR)$(onlinedir)" "$(DESTDIR)$(sounddir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-countyDATA install-docDATA install-fccDATA \
install-gnisDATA install-gpsDATA install-man install-mapDATA \
install-onlineDATA install-soundDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man: install-man1
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-countyDATA uninstall-docDATA uninstall-fccDATA \
uninstall-gnisDATA uninstall-gpsDATA uninstall-man \
uninstall-mapDATA uninstall-onlineDATA uninstall-soundDATA
uninstall-man: uninstall-man1
.MAKE: $(am__recursive_targets) all install-am install-data-am \
install-exec-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-hdr \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-countyDATA install-data install-data-am \
install-data-hook install-docDATA install-dvi install-dvi-am \
install-exec install-exec-am install-exec-hook install-fccDATA \
install-gnisDATA install-gpsDATA install-html install-html-am \
install-info install-info-am install-man install-man1 \
install-mapDATA install-onlineDATA install-pdf install-pdf-am \
install-ps install-ps-am install-soundDATA install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-countyDATA uninstall-docDATA \
uninstall-fccDATA uninstall-gnisDATA uninstall-gpsDATA \
uninstall-man uninstall-man1 uninstall-mapDATA \
uninstall-onlineDATA uninstall-soundDATA
# It'd be nice to remove the directory and contents at
# "${pkgdatadir}/doc" then install a symlink called "doc" there pointing
# to "${prefix}/share/doc/xastir/". The new location for the
# documentation is FHS compliant.
install-exec-hook:
-rm -rf $(DESTDIR)${pkgdatadir}/doc
install-data-hook:
cd $(DESTDIR)$(mapdir) && \
rm -f CC_OpenStreetMap.png && \
$(LN_S) CC_OpenStreetMap_logo.png CC_OpenStreetMap.png
# Use tiles for these maps
OSM_tiled_cycle.geo: OSM_template
sed -e '/THIS IS A TEMPLATE FILE/d' -e's/^#OSM_TILED_MAP/OSM_TILED_MAP/' \
-e's!^#URL tileURL!URL http://tile.opencyclemap.org/cycle/!' \
-e 's/-STYLE/-cycle/' \
< $(top_srcdir)/OSM_template >$@
OSM_tiled_mapnik.geo: OSM_template
sed -e '/THIS IS A TEMPLATE FILE/d' -e's/^#OSM_TILED_MAP/OSM_TILED_MAP/' \
-e's!^#URL tileURL!URL http://tile.openstreetmap.org/!' \
-e 's/-STYLE/-mapnik/' \
< $(top_srcdir)/OSM_template >$@
OSM_tiled_fosm.geo: OSM_template
sed -e '/THIS IS A TEMPLATE FILE/d' -e's/^#OSM_TILED_MAP/OSM_TILED_MAP/' \
-e's!^#URL tileURL!URL http://map.fosm.org/default/!' \
-e 's/-STYLE/-fosm/' \
< $(top_srcdir)/OSM_template >$@
ChangeLog::
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
More information about the Xastir
mailing list