[Xastir] get-NWSdata script

[Tom Russo]

On Wed, Jul 05, 2017 at 11:58:28PM -0400, we recorded a bogon-computron collision of the <ve3ctp at cogeco.ca> flavor, containing:
> Same error even after trying your recommendation.

That doesn't make sense, as the stuff on line 114 of that file is legal
bash.  

Please cut/paste the output of these commands into your next email:
  head /usr/local/share/xastir/scripts/get-NWSdata
  cat /usr/local/share/xastir/scripts/values

> From: Tom Russo
> Sent: July 5, 2017 2:42 PM
> To: ve3ctp at cogeco.ca
> Cc: xastir at xastir.org
> Subject: Re: [Xastir] get-NWSdata script
> 
> On Wed, Jul 05, 2017 at 01:40:41PM -0400, we recorded a bogon-computron collision of the <ve3ctp at cogeco.ca> flavor, containing:
> > All was going well..until..
> > 
> > rchive:  c_11au16.zip
> >   inflating: c_11au16.dbf            
> >   inflating: c_11au16.prj            
> >   inflating: c_11au16.shp            
> >   inflating: c_11au16.shx            
> > /usr/local/share/xastir/scripts/get-NWSdata: 114: /usr/local/share/xastir/scripts/get-NWSdata: Bad substitution
> 
> This line of the script is a recent addition by Curt, and appears to be
> a bashism.  Many linux distros have /bin/sh as nothing more than an alias
> for /bin/bash, but some don't --- and I believe that raspbian may be one
> of those.  On my pi, /bin/sh is "dash", not bash.  On my BSD systems, 
> /bin/sh is the original Bourne shell.
> 
> Curt might need to remove the bashism from get-NWSdata, since its "shebang"
> explicitly lists /bin/sh, which may be the Bourne shell or dash on some
> systems.  It is never safe to assume that /bin/sh is bash, and using
> bash extensions in scripts with "#!/bin/sh" at the top is a no-no.
> 
> In the meantime, try editing get-NWSdata to replace "/bin/sh" with "/bin/bash"
> and it should work.  This is not a general solution, as some operating 
> systems don't install bash in /bin.  BSD, for example, puts it in 
> /usr/local/bin.
> 
> > 
> > From: Tom Russo
> > Sent: July 5, 2017 1:01 PM
> > To: Xastir - APRS client software discussion
> > Subject: Re: [Xastir] get-NWSdata script
> > 
> > get-NWSdata accesses a helper script called "values" that must be present in 
> > the same directory as the script.  It is created at configure time, and "make 
> > install" will install them both to the same place.
> > 
> > It appears that you are trying to run the script that exists in the source tree.
> > "values" may or may not be present there depending on how you built xastir.
> > If you built using a separate "build directory" as we recommend, it won't
> > be there: values will be created in your build directory, but get-NWSdata
> > won't be copied in there.  If you are building directly in the source tree,
> > values will be created at configure time, but not until then, and will be 
> > removed if you do a "make distclean."
> > 
> > Once you do "make install" both get-NWSdata and values will be installed in
> > ${prefix}/share/xastir/scripts.  In that case, you should run it from that 
> > location, i.e. 'sudo /usr/local/share/xastir/scripts/get-NWSdata'
> > 
> > On Wed, Jul 05, 2017 at 10:49:09AM -0400, we recorded a bogon-computron collision of the <ve3ctp at cogeco.ca> flavor, containing:
> > > sudo ./get-NWSdata 
> > > 
> > > I get command not found
> > > 
> > > Tried to execute from root
> > > 
> > > 
> > > 
> > > 
> > > Sent from Mail for Windows 10
> > > 
> > > From: davidf4
> > > Sent: July 5, 2017 1:44 AM
> > > To: 'Xastir - APRS client software discussion'; 'Xastir - APRS client software discussion'
> > > Subject: Re: [Xastir] get-NWSdata script
> > > 
> > > Not normal..Try this:
> > > 
> > > sudo ./get-NWSdata
> > > 
> > > 
> > > -----Original Message-----
> > > From: Xastir [mailto:xastir-bounces at lists.xastir.org] On Behalf Of
> > > ve3ctp at cogeco.ca
> > > Sent: Tuesday, July 04, 2017 9:40 PM
> > > 
> > > 
> > > is this normal, or just me
> > > 
> > > pi at raspberrypi:~/src/Xastir/scripts $ sudo sh -x get-NWSdata
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Xastir mailing list
> > > Xastir at lists.xastir.org
> > > http://xastir.org/mailman/listinfo/xastir
> > > 
> > > 
> > > 
> > > ---
> > > This email has been checked for viruses by AVG.
> > > http://www.avg.com
> > > _______________________________________________
> > > Xastir mailing list
> > > Xastir at lists.xastir.org
> > > http://xastir.org/mailman/listinfo/xastir
> > 
> > -- 
> > Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
> > Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
> >  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]
> > 
> >  
> > 
> > 
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir
> > 
> 
> -- 
> Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
> Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
>  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]
> 
>  
> 
> 
> 

-- 
Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
 echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]