[Xastir] Xastir without a GPS

[David A Aitcheson]

Giuseppe,

Open Xastir

Click on "File"

Click on "Configure"

Click on "Timing"

Set "Posit TX Interval (min)" SLIDER to your desired beaconing rate. I
have mine set to 60.0 which is the max for that slider and the best for
a fixed station.

Then click on the "OK" button at the bottom of the Timing window to save
the settings.

73
Dave
KB3EFS



On 06/26/2017 11:24 AM, Menga wrote:
> In a fixed station the coordinates given in the configuration can be
> used to send its position and tell the others that the station is alive.
> I noted that if a GPS is not connected to the program, when starting
> Xastir a first packet with these coordinates is sent out on the air,
> but no more.
> A way exists to tell the system to continue to resent the packet with
> the station position (eventually with a lower rate), even if a GPS is
> not connected?
> Giuseppe
> IZ1GCL
>
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>