[Xastir] Xastir Digest, Vol 732, Issue 1
Udo VISINTINI
kf4kul at gmail.com
Sun Nov 8 08:49:39 PST 2020
I know I'm on the wrong subject, I have problems with getting in to my
mailing list, I will fix this later. My real problem is the connection to
the firenet.aprs2.net- server, is he down?
Thanks for your help
Uwf Vis
On Sat, Nov 7, 2020, 15:00 <xastir-request at lists.xastir.org> wrote:
> Send Xastir mailing list submissions to
> xastir at lists.xastir.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://xastir.org/mailman/listinfo/xastir
> or, via email, send a message with subject or body 'help' to
> xastir-request at lists.xastir.org
>
> You can reach the person managing the list at
> xastir-owner at lists.xastir.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Xastir digest..."
>
>
> Today's Topics:
>
> 1. Re: Confused..HELP (Tom Russo)
> 2. Re: Confused..HELP (kb8uih88)
> 3. Re: Confused..HELP (kb8uih88)
> 4. Re: Confused..HELP (David Lane)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 6 Nov 2020 15:26:19 -0700
> From: Tom Russo <russo at bogodyn.org>
> To: Xastir - APRS client software discussion <xastir at xastir.org>
> Subject: Re: [Xastir] Confused..HELP
> Message-ID: <20201106222619.GA14318 at bogodyn.org>
> Content-Type: text/plain; charset=us-ascii
>
> You did not install the autoconf/automake tools. You may have skipped
> that setion of the instructions.
>
> Please see https://xastir.org/index.php/HowTo:Raspbian again, where
> you'll find a list of prerequisites steps prior to the section you quoted,
> under the heading "Start installing packages".
>
> If you skip the steps in that section, nothing after it will work.
>
>
> On Fri, Nov 06, 2020 at 09:24:33PM +0000, we recorded a bogon-computron
> collision of the <kb8uih88 at charter.net> flavor, containing:
> > Hi, newbie here. I can't get Xastir to load properly on my Pi 3.
> > Excerpt below from https://xastir.org/index.php/HowTo:Raspbian [1]
> > When I asked for the bootstrap command to run I got a response of
> > root at raspberrypi:~/src/Xastir# ./bootstrap.sh 6) Removing
> > autom4te.cache directory... 5) Running aclocal..../bootstrap.sh: 15:
> > ./bootstrap.sh: aclocal: not foundroot at raspberrypi:~/src/Xastir#
> > Can anyone let me know what didn't load correctly?
> > Thanks
> >
> > GET XASTIR SOURCE CODE FROM THE GITHUB REPOSITORY
> >
> > In this method, you get your source code directly from the
> repository
> > the developers use to work on the software. Here's the step-by-step
> > method for getting it this way.
> >
> > You can make different choices here for where you want to store
> your
> > code. This example puts it in a src directory under the user's home
> > directory:
> >
> > mkdir ~/src cd ~/src
> >
> > Then issue the following command to retrieve the latest Xastir
> code:
> >
> > git clone https://github.com/Xastir/Xastir.git [2]
> >
> > The above command could take a while to finish if you're on a slow
> > link, as there are a lot of files to download.
> >
> > * Run bootstrap to generate Makefile.am and configure:
> >
> > cd Xastir ./bootstrap.sh
> >
> >
> >
> > Links:
> > ------
> > [1] https://xastir.org/index.php/HowTo:Raspbian
> > [2] https://github.com/Xastir/Xastirgit
> >
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir
>
> --
> Tom Russo KM5VY
> Tijeras, NM
>
> echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z]
> [n-z][a-m]
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 06 Nov 2020 19:05:32 -0500
> From: kb8uih88 <kb8uih88 at charter.net>
> To: russo at bogodyn.org, Xastir - APRS client software discussion
> <xastir at lists.xastir.org>
> Subject: Re: [Xastir] Confused..HELP
> Message-ID: <mailman.2.1604779201.25572.xastir at lists.xastir.org>
> Content-Type: text/plain; charset=utf-8
>
> Thank you. Will go back later and see what I missed.Sent from my Verizon,
> Samsung Galaxy smartphone
> -------- Original message --------From: Tom Russo <russo at bogodyn.org>
> Date: 11/6/20 5:26 PM (GMT-05:00) To: Xastir - APRS client software
> discussion <xastir at xastir.org> Subject: Re: [Xastir] Confused..HELP You
> did not install the autoconf/automake tools.? You may have skippedthat
> setion of the instructions.Please see
> https://xastir.org/index.php/HowTo:Raspbian? again, whereyou'll find a
> list of prerequisites steps prior to the section you quoted,under the
> heading "Start installing packages".If you skip the steps in that section,
> nothing after it will work.On Fri, Nov 06, 2020 at 09:24:33PM +0000, we
> recorded a bogon-computron collision of the <kb8uih88 at charter.net>
> flavor, containing:> Hi, newbie here. I can't get Xastir to load properly
> on my Pi 3.> Excerpt below from
> https://xastir.org/index.php/HowTo:Raspbian [1] > When I asked for the
> bootstrap command to run I got a response of > root at raspberrypi:~/src/Xastir#
> ./bootstrap.sh 6) Removing> autom4te.cache directory... 5) Running
> aclocal..../bootstrap.sh: 15:> ./bootstrap.sh: aclocal: not
> foundroot at raspberrypi:~/src/Xastir# > Can anyone let me know what didn't
> load correctly?> Thanks> > GET XASTIR SOURCE CODE FROM THE GITHUB
> REPOSITORY> > In this method, you get your source code directly from the
> repository> the developers use to work on the software. Here's the
> step-by-step> method for getting it this way.> > You can make different
> choices here for where you want to store your> code. This example puts it
> in a src directory under the user's home> directory:> > mkdir ~/src
> cd ~/src > > Then issue the following command to retrieve the latest
> Xastir code:> > git clone https://github.com/Xastir/Xastir.git
> [2] > > The above command could take a while to finish if you're on a slow>
> link, as there are a lot of files to download.> > * Run bootstrap to
> generate Makefile.am and configure:> > cd Xastir ./bootstrap.sh> > >
> > Links:> ------> [1] https://xastir.org/index.php/HowTo:Raspbian> [2]
> https://github.co
> m/Xastir/Xastirgit> > _______________________________________________>
> Xastir mailing list> Xastir at lists.xastir.org>
> http://xastir.org/mailman/listinfo/xastir-- Tom Russo??? KM5VYTijeras,
> NM? echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z]
> [n-z][a-m]_______________________________________________Xastir mailing
> listXastir at lists.xastir.orghttp://xastir.org/mailman/listinfo/xastir
>
> ------------------------------
>
> Message: 3
> Date: Fri, 06 Nov 2020 19:54:34 -0500
> From: kb8uih88 <kb8uih88 at charter.net>
> To: Xastir - APRS client software discussion <xastir at lists.xastir.org>
> Subject: Re: [Xastir] Confused..HELP
> Message-ID: <mailman.3.1604779201.25572.xastir at lists.xastir.org>
> Content-Type: text/plain; charset=utf-8
>
> WOW! THANKS. Will print this to see the steps that should occur.?Sent from
> my Verizon, Samsung Galaxy smartphone
> -------- Original message --------From: David Lane <kg4giy at gmail.com>
> Date: 11/6/20 4:58 PM (GMT-05:00) To: Xastir - APRS client software
> discussion <xastir at lists.xastir.org> Subject: Re: [Xastir] Confused..HELP
> Fair enough.Here is what ?should? happen once you have all the goo
> installed. I did not run the compile.pi at pi4-4-second:~ $ lsBookshelf?
> Documents? Music???? Public???? VideosDesktop??? Downloads? Pictures?
> Templatespi at pi4-4-second:~ $ mkdir srcpi at pi4-4-second:~ $ cd
> srcpi at pi4-4-second:~/src $? git clone
> https://github.com/Xastir/Xastir.gitCloning into 'Xastir'...remote:
> Enumerating objects: 77, done.remote: Counting objects: 100% (77/77),
> done.remote: Compressing objects: 100% (64/64), done.remote: Total 30220
> (delta 29), reused 44 (delta 13), pack-reused 30143Receiving objects: 100%
> (30220/30220), 22.49 MiB | 4.77 MiB/s, done.Resolving deltas: 100%
> (23108/23108), done.pi at pi4-4-second:~/src $ lsXastirpi at pi4-4-second:~/src
> $ cd Xastir/pi at pi4-4-second:~/src/Xastir $ ./bootst
> rap.sh??? 6) Removing autom4te.cache directory...??? 5) Running
> aclocal...??? 4) Running autoheader...??? 3) Running autoconf...??? 2)
> Running automake...configure.ac:50: installing './compile'configure.ac:46:
> installing './config.guess'configure.ac:46: installing './config.sub'
> configure.ac:26: installing './install-sh'configure.ac:26: installing
> './missing'callpass/Makefile.am: installing './depcomp'??? 1) Generating
> derived language files.....Bootstrap complete.pi at pi4-4-second:~/src/Xastir
> $> On Nov 6, 2020, at 4:53 PM, kb8uih88 <kb8uih88 at charter.net> wrote:> >
> My message got all jumbled up. Will respond later when I can get on my
> computer. Thanks for fast response.Sent from my Verizon, Samsung Galaxy
> smartphone> -------- Original message --------From: David Lane <
> kg4giy at gmail.com> Date: 11/6/20? 4:31 PM? (GMT-05:00) To: Xastir - APRS
> client software discussion <xastir at lists.xastir.org> Subject: Re:
> [Xastir] Confused..HELP Before you did the git clone did you create the
> local src
> directory then change into it?You really should not be running the
> compile as root, but check your /home/root/ directory and make sure you
> have a directory called src/Xastir (/home/root/src/Xastir). When you do the
> git clone, it should create the Xastir directory, you don?t need to
> actually create it.If you did not do the git clone as root, then the source
> file is in the home directory of the user you logged in as (likely pi) so
> /home/pi/scr/Xastir (or if you did not create the src directory, Xastir).
> Once the clone is complete, it should all fall into place.David> On Nov 6,
> 2020, at 4:24 PM, kb8uih88 at charter.net wrote:> > Hi, newbie here. I can't
> get Xastir to load properly on my Pi 3.> Excerpt below from
> https://xastir.org/index.php/HowTo:Raspbian [1]> When I asked for the
> bootstrap command to run I got a response of> root at raspberrypi:~/src/Xastir#
> ./bootstrap.sh 6) Removing> autom4te.cache directory... 5) Running
> aclocal..../bootstrap.sh: 15:> ./bootstrap.sh: aclocal: not foundro
> ot at raspberrypi:~/src/Xastir#> Can anyone let me know what didn't load
> correctly?> Thanks> > GET XASTIR SOURCE CODE FROM THE GITHUB REPOSITORY> >
> In this method, you get your source code directly from the repository>
> the developers use to work on the software. Here's the step-by-step> method
> for getting it this way.> > You can make different choices here for where
> you want to store your> code. This example puts it in a src directory under
> the user's home> directory:> > mkdir ~/src cd ~/src> > Then
> issue the following command to retrieve the latest Xastir code:> >
> git clone https://github.com/Xastir/Xastir.git [2]> > The above command
> could take a while to finish if you're on a slow> link, as there are a lot
> of files to download.> > * Run bootstrap to generate Makefile.am and
> configure:> > cd Xastir ./bootstrap.sh> > > > Links:> ------> [1]
> https://xastir.org/index.php/HowTo:Raspbian> [2]
> https://github.com/Xastir/Xastirgit> >
> _______________________________________________>
> Xastir mailing list> Xastir at lists.xastir.org>
> http://xastir.org/mailman/listinfo/xastir>
> _______________________________________________> Xastir mailing list>
> Xastir at lists.xastir.org> http://xastir.org/mailman/listinfo/xastir
>
> ------------------------------
>
> Message: 4
> Date: Fri, 6 Nov 2020 19:59:42 -0500
> From: David Lane <kg4giy at gmail.com>
> To: russo at bogodyn.org, Xastir - APRS client software discussion
> <xastir at lists.xastir.org>
> Subject: Re: [Xastir] Confused..HELP
> Message-ID: <5891544B-1393-44A2-A896-21A2C3D8E84D at gmail.com>
> Content-Type: text/plain; charset=utf-8
>
> Thanks Tom,
>
> I had that thought after I sent my first post. I ran through the first few
> steps and it worked so I suspect that was the core problem. It?s been a bit
> since I did my last full compile. Good documentation so my hat is off to
> whoever did the work.
>
> David
>
> ---
> David A. Lane, KG4GIY
> EC/RO Prince William County ARES?/RACES
> +1.703.628.3868
> http://www.pwcares.org/
> IM: kg4giy
>
> > On Nov 6, 2020, at 17:26, Tom Russo <russo at bogodyn.org> wrote:
> >
> > ?You did not install the autoconf/automake tools. You may have skipped
> > that setion of the instructions.
> >
> > Please see https://xastir.org/index.php/HowTo:Raspbian again, where
> > you'll find a list of prerequisites steps prior to the section you
> quoted,
> > under the heading "Start installing packages".
> >
> > If you skip the steps in that section, nothing after it will work.
> >
> >
> > On Fri, Nov 06, 2020 at 09:24:33PM +0000, we recorded a bogon-computron
> collision of the <kb8uih88 at charter.net> flavor, containing:
> >> Hi, newbie here. I can't get Xastir to load properly on my Pi 3.
> >> Excerpt below from https://xastir.org/index.php/HowTo:Raspbian [1]
> >> When I asked for the bootstrap command to run I got a response of
> >> root at raspberrypi:~/src/Xastir# ./bootstrap.sh 6) Removing
> >> autom4te.cache directory... 5) Running aclocal..../bootstrap.sh: 15:
> >> ./bootstrap.sh: aclocal: not foundroot at raspberrypi:~/src/Xastir#
> >> Can anyone let me know what didn't load correctly?
> >> Thanks
> >>
> >> GET XASTIR SOURCE CODE FROM THE GITHUB REPOSITORY
> >>
> >> In this method, you get your source code directly from the repository
> >> the developers use to work on the software. Here's the step-by-step
> >> method for getting it this way.
> >>
> >> You can make different choices here for where you want to store your
> >> code. This example puts it in a src directory under the user's home
> >> directory:
> >>
> >> mkdir ~/src cd ~/src
> >>
> >> Then issue the following command to retrieve the latest Xastir code:
> >>
> >> git clone https://github.com/Xastir/Xastir.git [2]
> >>
> >> The above command could take a while to finish if you're on a slow
> >> link, as there are a lot of files to download.
> >>
> >> * Run bootstrap to generate Makefile.am and configure:
> >>
> >> cd Xastir ./bootstrap.sh
> >>
> >>
> >>
> >> Links:
> >> ------
> >> [1] https://xastir.org/index.php/HowTo:Raspbian
> >> [2] https://github.com/Xastir/Xastirgit
> >>
> >> _______________________________________________
> >> Xastir mailing list
> >> Xastir at lists.xastir.org
> >> http://xastir.org/mailman/listinfo/xastir
> >
> > --
> > Tom Russo KM5VY
> > Tijeras, NM
> >
> > echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z]
> [n-z][a-m]
> >
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>
>
> ------------------------------
>
> End of Xastir Digest, Vol 732, Issue 1
> **************************************
>
More information about the Xastir
mailing list