[Xastir] Still getting crashes

[Brian D Heaton]

Jack,

	How about the version for your kernel and XFree86?

	I'm going to take a guess you're running the KPC-3+ in serial KISS mode
under Xastir.  Is this correct?  I may not have dug deeply enough yet,
but it appears that the data that is reported in the segfault dump is
pulled before the packet is processed back to readable format.  

			THX/BDH


	


On Mon, 2003-12-15 at 05:15, Jack Reilly wrote:
> Thanks Brian.   I am using Suse 8.2   Open Motif version is 2.2.2-204
> The serial interface goes to to a KPC-3 Plus.
> 
> Most of the data in my tnc.log file is hexadecimal. I only enabled the log a 
> week ago and that is all I have seen.
> 
> Jack                    aa6vn at pacbell.net
> 
> On Monday 15 December 2003 07:05, you wrote:
> > Jack,
> >
> > 	I may be coming into this a bit late, but can you please refresh us all
> > on the specifics of your OS?  What distribution, X version, OpenMotif
> > version (IIRC, you are using openmotif), etc, etc.
> >
> >
> > 	What type of TNC interface are you using?  The "Last incoming line"
> > data is all hexadecimal numbers.  For any interface type I can think of
> > that should be human readable text at the point it hits that routine.
> >
> > 			73/N5VFF
> >
> > On Sun, 2003-12-14 at 06:21, Jack Reilly wrote:
> > > In the four days since I replaced my video card card I have not had
> > > crashes where I have to restart X or KDE. But I am still getting crashes
> > > of Xastir where I have to restart Xastir.  Here are three that I have
> > > had:
> > >
> > > 1. Xastir just disappeared without any indication why.
> > >
> > > 2. I got one of these which was my most frequwnt one before the card
> > > change:
> > >
> > > "Making user /home/jacrei/.xastir/tracklogs/KG6MRC-10.trk file
> > > X Error of failed request:  BadValue (integer parameter out of range for
> > > operation)
> > >   Major opcode of failed request:  56 (X_ChangeGC)
> > >   Value in failed request:  0x4
> > >   Serial number of failed request:  13307969
> > >   Current serial number in output stream:  13307977"
> > >
> > > That one happened while I was looking thru the list - All Stations.
> > >
> > > 3. Got this report:
> > > "Caught Segfault! Xastir will terminate
> > > Last incoming line was:          3D333631372E3337 4E2F31313930382E
> > > 3934575F3330302F 3030306730303074 3035387230303070 3031332E2E2E2E68
> > > 3030623130313735 6455326B732E630D
> > > 07:05:56"
> > >
> > > I found this code in the tnc.log file and here is that section:
> > > >> 82A0A4B0686C60 AE826CB2988460 AE826C949482E6 AE92888A644061 03F0
> > >
> > >          3D333631372E3337 4E2F31313930382E 3934575F3133322F
> > > 3030306730303074 303
> > > 4347230303070 3030302E2E2E2E68 3030623130323134 6455326B732E630D
> > > WA6YLB>APRX46,WA6JJA-3*,WIDE2:=3617.37N/11908.94W_132/000g000t044r000p000
> > >....h00 b10214dU2ks.c
> > > # Sat Dec 13 15:35:38 PST 2003
> > >
> > > This is all way over my head and I sure need help!
> > >
> > > Jack       aa6vn at pacbell.net
> > >
> > > _______________________________________________
> > > Xastir mailing list
> > > Xastir at xastir.org
> > > http://krypton.hscs.virginia.edu/mailman/listinfo/xastir
-- 
------------------------------------------------------------------
Brian D Heaton
Senior Network Engineer
Janus Research Group
(706) 364-9100
PGP Key Available