[Xastir] Fwd: *.map problems

[Tom Robson]

Loaded the latest cvs today and all of the reindexing errors have been 
resolved, however the:

map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too few points:1,
Skipping XFillPolygon()map_plot:Too few points:1, Skipping
XFillPolygon()map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too
few points:1, Skipping XFillPolygon()map_plot:Too few points:1, Skipping

is still occurring on one map.  Perhaps there is something wrong with it, but 
it displays properly

It only occurs when the properties, Maps > Properties > Draw filled = Yes 
and the Maps > Enable Color Fills > is selected.

Not a big issue as I realize there are more pressing things....

...73 Tom

----------  Forwarded Message  ----------
Subject: *.map problems
Date: Mon, 30 Jun 2003 17:01:30 -0700
From: Tom Robson <ve7did at dccnet.com>
To: xastir at krypton.hscs.virginia.edu


May have missed something in list recently.   Usually run xastir from run
command in kde so don't notice any errors.  Ran today from terminal and
noticed some of my *.map files give many errors.  Some display properly and
most don't display.  As far as I can remember all of these ran fine
previously, but can't remember how far back.  All other maps work properly,
geo, shapefiles etc

Running from latest cvs today.   slackware 8.0

One *.map appears to work ok, but gives following output in terminal. This is
just a bit of the terminal output.

map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too few points:1,
Skipping XFillPolygon()map_plot:Too few points:1, Skipping
XFillPolygon()map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too
few points:1, Skipping XFillPolygon()map_plot:Too few points:1, Skipping
XFillPolygon()map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too
few points:1, Skipping XFillPolygon()map_plot:Too few points:1, Skipping
XFillPolygon()map_plot:Too few points:1, Skipping XFillPolygon()map_plot:Too
few points:1, Skipping XFillPolygon()map_plot:Too few points:1, Skipping
XFillPo


A lot of *.map files don't display and the following errors result of startup
or map reindexing.  This is only a few.

index_restore_from_file: bottom extent incorrect 2487767296 in map name:
CANADA/BC/BCGVRDSW.MAP

index_restore_from_file: bottom extent incorrect 3639767296 in map name:
CANADA/BC/BCLOGAN.MAP

index_restore_from_file: bottom extent incorrect 2631767296 in map name:
CANADA/BC/BCPGBIG.MAP

index_restore_from_file: bottom extent incorrect 2199767296 in map name:
CANADA/BC/BCPGS.MAP

index_restore_from_file: bottom extent incorrect 4276967296 in map name:
CANADA/BC/BCSOUTH.MAP


...73 Tom

- -------------------------------------------------------