[Xastir] HSP cable

[Mike Fenske]

Attached is a diagram of the Kantronics HSP cable. Can't remember where I
got it. Hope it helps.

Mike Fenske
VE7MKF

At 15:55 07/05/03 -0400, Stephen West-Fisher wrote:
>BobDonnell at arkalmus.com wrote:
>> Hi again Stephen,
>> 
>> Looking at that design, I can think of ways that have a higher
>> likelihood of working.  That said, without having to make major changes,
>> I'd suggest reducing the value of the resistor that runs between the two
>> Pin 3 connections - take it down to say 2200 ohms and see if that works.
>> I'm going to query the NWAPRS mailing list and see if I can find out
>> more info - this appears to have been done by someone here in the
>> northwest, or the file has been renamed - the only place Google found it
>> was in the NWAPRS web site.
>> 
>> 73, Bob
>
>>>The plans came from http://www.nwaprs.org/hsp.jtm. I built the DB-25 
>>>version.
>
>I looked at the document with DOS ARPS, looks like a a bit more complicated
>design. Would it work better? I don't mind throughing away what I have, this
>is a learning experience after all.
>
>If you can recommend any other designs, let me know, I don't mind 
>building a bunch of stuff.
>
>
>-- 
>Stephen West-Fisher
>Coastal Data Systems
>727.418.9774
>http://www.coastaldatasystems.com/
>
>_______________________________________________
>Xastir mailing list
>Xastir at xastir.org
>https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
>