No subject

Mon Sep 22 07:25:38 EDT 2003

>Orrin Winton wrote:
>> Gerry:  from this reply of yours, i'm doing the
>> following:
>> 
>> (1) Going to try to download ImageMagick source
>> from www.imagemagick.org; they have some detailed
>> instructions for cvs that include downloading 
>> specific version numbers (if available).
>
>I've several programs that require ImageMagick to work (correctly!).  I 
>usually do a complete RH install (complete may vary depending on 
>requirements specific to a system) and then most of the highly evolving 
>project packages I use, I back off the RPM and work from tarball.  I've 
>had good success with this.
>
>> (2) You wrote, in part:
>> 
>>>The libs might have been dropped in /usr/lib but you 
>>>need to check.
>>>
>>>Then, you need to make sure /usr/lib is referenced 
>>>in /etc/ld.so.conf 
>>>and THEN you need to run, as root, /sbin/ldconfig
>> 
>> 
>> When i 'cd /usr/lib' and do 'ls Imag*' all i get is
>> about 10 files of the type .mgk and a directory
>> called modules-Q16.  When i try to 'cd modules-Q16'
>> it tells me there is no such file or directory.
>
>And without telling you so, it dropped you into the ImageMagick 
>directory below it.  That's why 'cd modules-Q16' failed... try a 'cd 
>Imag' with tab-completion to get your appropriate directory name, and 
>your success should improve...
>
>> (3) You wrote:
>> 
>>>More'n likely you don't have all the headers and 
>>>development stuff installed, and possibly are 
>>>missing some of the gnu c/c++/... stuff.
>> 
>> 
>> Have to put that on my list of things to troubleshoot.
>> Xastir 1.2.0 compiled just fine (no shapelib nor
>> ImMagick though).
>
>And a lot of changes and enhancements happened since then.
>
>You are using 'bootstrap.sh' and autoconf (./configure), right?
>
>gerry
>> --------- Original Message ---------
>> 
>> DATE: Sun, 21 Sep 2003 08:41:07
>> From: Gerry Creager N5JXS <gerry.creager at tamu.edu>
>> To: oakenshieldd at lycos.com
>> Cc: xastir at xastir.org
>> 
>> 
>>>Aha! Later response!  So I didn't get as far behind as I think I did?
>>>
>>>Orrin Winton wrote:
>>>
>>>>Gerry, you wrote:
>>>>
>>>>
>>>>
>>>>>Is the imagemagick devel package installed?
>>>>
>>>>
>>>>(Info: this is Linux now, not Cygwin.  Compiling
>>>>1.2.1 for Cygwin has gone just fine.)
>>>
>>>I don't do Windows (just ask my kids; they're not happy with me right 
>>>now over that!  :-)
>>>
>>>
>>>>Well, i'd gone to www.imagemagick.org and snagged
>>>>binaries (not source) for 5.5.7, but now i don't
>>>>know if they were 'development' libraries or not.
>>>>Also, I wonder if i should be compiling from source?
>>>
>>>Probably should be compiling from source...
>>>
>>>
>>>>What version of imagemagick are people using 
>>>>now that works?  (This is for Linux, not Cygwin now.)
>>>>And are they using binaries or compiling from source.
>>>
>>>I've got 5.5.6 and everything appears to work.
>>>
>>>
>>>>Can i find 5.5.3 binaries for Linux, or source?
>>>>
>>>>After i got 5.5.7 from www.imagemagick.org, i did:
>>>>
>>>>cp -R * /usr
>>>>
>>>>Does that constitute "installing" it?
>>>>
>>>>Also, the compile errors i get (below) are when
>>>>i have IMAGE_MAGICK defined:
>>>
>>>The libs might have been dropped in /usr/lib but you need to check.
>>>
>>>Then, you need to make sure /usr/lib is referenced in /etc/ld.so.conf 
>>>and THEN you need to run, as root, /sbin/ldconfig
>>>
>>>
>>>>>>(make clean;make -j3 2>&1) | tee make.log
>>>>>>
>>>>>>At the end of the make, i got messages:
>>>>>>
>>>>>>/usr/bin/ld: cannot find - llcms
>>>>>>collect 2: ld returned 1 exit status
>>>>>>make[2]: *** [testawk] Error 1
>>>>>>make[2]: *** Waiting for unfinished jobs ...
>>>>>>make[2]: leaving directory '/root/xastir/src'
>>>>>>make[1]: *** [all-recursive] Error 1
>>>>>>make[1]: leaving directory '/root/xastir'
>>>>>>make: *** [all] Error 2
>>>>>>
>>>>
>>>>
>>>>When i have IMAGE_MAGICK undef, still i keep seeing
>>>>lots of references to ImageMagick-5.5.7 in the 
>>>>compile messages that appear, and the errors i get
>>>>are different:
>>>>
>>>>map_geo.c: In function 'draw_geo_image_map':
>>>>map_geo.c:1499: 'pixel_pack' undeclared (first use in
>>>>   this function)
>>>>map_geo.c:1499: (Each undeclared identifier is 
>>>>   reported only once for each function it appears in.)
>>>>map_geo.c:1499: 'l' undeclared (first use in this
>>>>   function)
>>>>make[2]: *** [map_geo.o] Error 1
>>>>make[2]: *** Waiting for unfinished jobs ....
>>>>make[2]: Leaving directory '/root/xastir/src'
>>>>make[1]: *** [all-recursive] Error 1
>>>>make[1]: Leaving directory '/root/xastir'
>>>>make: *** [all] Error 2
>>>>
>>>>
>>>>One thing i probably should mention is that i have
>>>>a lot of trouble compiling ANY program for Linux
>>>>from source.  In the past two months i've had not
>>>>much problem installing RPMs and other binaries,
>>>>but have only succeeded compiling TWPSK and XASTIR
>>>>1.2.0.  Now Xastir 1.2.1 is not compiling, but i 
>>>>hope i can find a fix for that.
>>>
>>>More'n likely you don't have all the headers and development stuff 
>>>installed, and possibly are missing some of the gnu c/c++/... stuff.
>>>
>>>Gerry
>> 
>> 
>> 
>> 
>> ____________________________________________________________
>> Diabetics: Click here for a Free Glucose Meter from Access Diabetic.
>> http://r.hotbot.com/r/lmt_ad/http://mocda4.com/1/c/563632/102938/302214/302214
>> This offer applies to U.S. Residents Only
>
>-- 
>Gerry Creager -- gerry.creager at tamu.edu
>Network Engineering -- AATLT, Texas A&M University	
>Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.847.8578
>Page: 979.228.0173
>Office: 903A Eller Bldg, TAMU, College Station, TX 77843
>
>

____________________________________________________________
Diabetics: Click here for a Free Glucose Meter from Access Diabetic.
http://r.hotbot.com/r/lmt_ad/http://mocda4.com/1/c/563632/102938/302214/302214
This offer applies to U.S. Residents Only