[Xastir] Xastir transmit and tnc

[Brian D Heaton]

Chris,

	The tnc-start file should do that for you.  What kind of TNC do you
have?  There are a couple of different tnc-start files that you can
rename to tnc-start.sys (IIRC) and that is the one that gets used to
start the TNC.

				THX/BDH



On Sun, 2004-02-15 at 01:02, Chris Abbott wrote:
> Ok, yeah, i put it into converse mode and quit the terminal, then went
> into xastir and tx. The STA lit for only a few milliseconds and then the
> ptt led lit up, signaling a tx. Thanks for the help.
> 
> Thanks and 73
> KD5WCR
> 
> 
> On Sat, 2004-02-14 at 23:17, Brian D Heaton wrote:
> > Chris,
> > 
> > 	1200bps is the standard for 144.390. The "MYCALL was ..." means that
> > the TNC is still in command mode.
> > 
> > 			73/N5VFF
> > 
> > 
> > On Sat, 2004-02-14 at 23:28, Chris Abbott wrote:
> > > Ok, I got the tnc to fire up the ptt led, but until i interface the
> > > radio, it can't really transmit. I then tried transmitting via xastir
> > > and nothing happened, the tnc just repsonded(recorded in the logs) 
> > > 
> > > KD5WCR>APX130,RELAY,WIDE:=3215.75N/09051.28WxPHG2110XASTIR-Linux^M
> > > MYCALL   was KD5WCR
> > > 
> > > It never lit the transmit led. Also, what is the baud rate used on
> > > 2m(freq 144.390)? I was reading the manual and according to it, it can
> > > only transmit up to 1200 baud, but it could do 9600 baud via an external
> > > modem.
> > > 
> > > Thanks
> > > 
> > > 
> > > -----------------------------------------------------------------
> > > Chris Abbott redfox at 99b.org
> > > KD5WCR kd5wcr at arrl.net
> > > -----------------------------------------------------------------
> > > 
> > > _______________________________________________
> > > Xastir mailing list
> > > Xastir at xastir.org
> > > https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
> > > 
> > 
> 
>