[Xastir] Xastir transmit and tnc

[Chris Abbott]

Ok, yeah, i put it into converse mode and quit the terminal, then went
into xastir and tx. The STA lit for only a few milliseconds and then the
ptt led lit up, signaling a tx. Thanks for the help.

Thanks and 73
KD5WCR


On Sat, 2004-02-14 at 23:17, Brian D Heaton wrote:
> Chris,
> 
> 	1200bps is the standard for 144.390. The "MYCALL was ..." means that
> the TNC is still in command mode.
> 
> 			73/N5VFF
> 
> 
> On Sat, 2004-02-14 at 23:28, Chris Abbott wrote:
> > Ok, I got the tnc to fire up the ptt led, but until i interface the
> > radio, it can't really transmit. I then tried transmitting via xastir
> > and nothing happened, the tnc just repsonded(recorded in the logs) 
> > 
> > KD5WCR>APX130,RELAY,WIDE:=3215.75N/09051.28WxPHG2110XASTIR-Linux^M
> > MYCALL   was KD5WCR
> > 
> > It never lit the transmit led. Also, what is the baud rate used on
> > 2m(freq 144.390)? I was reading the manual and according to it, it can
> > only transmit up to 1200 baud, but it could do 9600 baud via an external
> > modem.
> > 
> > Thanks
> > 
> > 
> > -----------------------------------------------------------------
> > Chris Abbott redfox at 99b.org
> > KD5WCR kd5wcr at arrl.net
> > -----------------------------------------------------------------
> > 
> > _______________________________________________
> > Xastir mailing list
> > Xastir at xastir.org
> > https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
> > 
>