[Xastir] Xastir transmit and tnc

[Brian D Heaton]

Chris,

	1200bps is the standard for 144.390. The "MYCALL was ..." means that
the TNC is still in command mode.

			73/N5VFF


On Sat, 2004-02-14 at 23:28, Chris Abbott wrote:
> Ok, I got the tnc to fire up the ptt led, but until i interface the
> radio, it can't really transmit. I then tried transmitting via xastir
> and nothing happened, the tnc just repsonded(recorded in the logs) 
> 
> KD5WCR>APX130,RELAY,WIDE:=3215.75N/09051.28WxPHG2110XASTIR-Linux^M
> MYCALL   was KD5WCR
> 
> It never lit the transmit led. Also, what is the baud rate used on
> 2m(freq 144.390)? I was reading the manual and according to it, it can
> only transmit up to 1200 baud, but it could do 9600 baud via an external
> modem.
> 
> Thanks
> 
> 
> -----------------------------------------------------------------
> Chris Abbott redfox at 99b.org
> KD5WCR kd5wcr at arrl.net
> -----------------------------------------------------------------
> 
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
>