[Xastir] problem connecting to an aprs-is server

[Gerry Creager N5JXS]

Point it toward fourth.aprs.net or n5jxs.isc.tamu.edu and let me know if 
it crumps.  I'm having trouble getting CVS updates right now but I'm 
certainly getting traffic from my Tier 1 server.

gerry

Alan Crosswell wrote:
> I tried connecting to several aprs-is servers and get the following 
> failure:
> 
> Opening a Network stream
> IP Address: 128.148.32.112
> net_connect_thread():Net Shutdown 1 Returned -1, port 2
> net_connect_thread():Net Close 1 Returned 0, port 2
> Creating new thread
> net_connect_thread start
> We have a socket to use
> after htons
> after setsockopt
> calling connect(), port: 10152
> Thread exceeded it's time limit or failed to connect! Port 2
> Killing thread
> It was a timeout.
> Thread did not return, port 2, DEVICE_ERROR ***
> Net ok: -2, port 2
> *** net_init is returning a 0 ***
> 
> Running ethereal shows that the data has in fact started flowing toward 
> me from the server I've connected to.  I've only tried using APRS-IS 
> once or twice before and it did work that time.  The timeout error 
> happens immediately -- before a TCP timeout could have possibly happened.
> 
> What am I doing wrong?  This is with current CVS.
> 
> 73 de Alan N2YGK
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://krypton.hscs.virginia.edu/mailman/listinfo/xastir

-- 
Gerry Creager -- gerry.creager at tamu.edu
Network Engineering -- AATLT, Texas A&M University	
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.847.8578
Page: 979.228.0173
Office: 903A Eller Bldg, TAMU, College Station, TX 77843