[Xastir] tnc2-ui

[Dick C. Reichenbach]

Given the very high number of rejected commands, is it possible that he 
has the TNC in beginners mode rather than Expert or Advanced mode?

I think the command is INTFACE TERMINAL on my PacComm.  I don't have the 
manual in front of me.

Dick R.

Alessio Sangalli wrote:

> I have to write to the mailing list because I can't contact Curt
> directly; his mail server gives me an error.
>
>
> Curt, WE7U wrote:
>
>> Have you tried it with the tnc-startup.sys and tnc-stop.sys files to
>> see what commands are NOT accepted by that TNC?  I think there are
>> more commands that we need to use than the abbreviated lists above.
>
>
> ok, here there are the results for the .sys files:
> tnc-startup.sys:
> int terminal        <- NOT recognized
> ECHO off
> MYAlias RELAY        <- NOT recognized
> B E 0            <- NOT recognized
> DIGI on            <- NOT recognized
> EXP on            <- NOT recognized
> Filt off        <- NOT recognized
> FLow off        <- NOT recognized
> FUll off        <- NOT recognized
> HEA off            <- NOT recognized
> LFadd off        <- NOT recognized
> LFSup on        <- NOT recognized
> AUTOLF off        <- NOT recognized
> MCOM off        <- OK, recognized
> MFILT off        <- NOT recognized
> MON on            <- NOT recognized
> MResp off        <- NOT recognized
> MRPt on            <- NOT recognized
> MSTamp off        <- NOT recognized
> MXMit off        <- NOT recognized
> NEWmode off        <- NOT recognized
> PASSALL off        <- NOT recognized
> PID off            <- NOT recognized
> MNOAX25 off        <- NOT recognized
> PIDCHECK on        <- NOT recognized
> MPROTO OFF        <- NOT recognized
> SCR 0            <- NOT recognized
>
> tnc-stop.sys:
> UNPROTO CQ        <- Ok, recognized
> AUTOLF ON        <- NOT recognized
>
>
>
>
> bye, thank you
> Alessio Sangalli IW2NYD
>
> PS I tried to give those commands from minicom, when I say "not
> recognized" I mean that the TNC answers with an error message.
>
>
> PPS I have a command reference for this TNC, but it's in ITALIAN. If
> somebody wants to see it, at least for the command list, I send it
> without problems.
>
>
>
>
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://krypton.hscs.virginia.edu/mailman/listinfo/xastir
>