[Xastir] Server Port vs. Internet Server?

[Andrew Rich (VK4TEC)]

I just telneted to XASTIR on port 2023

telnet 192.168.0.188 2023

and data came out from XASTIR.

You need to authenticate to SEND to XASTIR

You are seeing urself ... ok then the telnet works

BUt not others....dmapper issue



On Sun, 2004-11-28 at 06:30, Kevin Ratcliff wrote:
> Andrew,
> 
> Thanks for the Perl code. However, I was hoping to make this work by 
> connecting Dmapper directly to the Xastir server port using its built-in 
> feature. Since Dmapper successfully connects to APRS Internet servers I 
> assumed it would work with the Xastir server port as well. If the format 
> of the Xastir server port is different than the format of the APRS 
> Internet servers then I understand why it doesn't work.
> 
> If they are both sending the data with the same format then I'm still 
> puzzled as to why I can't get this setup to work. This could be an 
> Xastir issue, a Dmapper issue, or most likely user error on my part! If 
> nobody has any suggestions then I can email the author of Dmapper, but 
> since Xastir has a support group and Dmapper doesn't I thought I'd start 
> here.
> 
> Also, I guess I should mention that Dmapper does decode MY position when 
> connected to the Xastir server port, just not any of the others. I am 
> set up without a transmitter right now so it is decoding my position 
> directly through the server port without any digipeating.
> 
> Thanks.
> 
> Kevin
> KB9MQU
> 
> 
> 
> Andrew Rich (VK4TEC) wrote:
> > How to connect to XASTIR server socket using PERL
> > 
> > Do you need an intermediatory program ? Are the formats the same ?
> > 
> > You can do this by hand too ;-)
> 
-- 
Andrew Rich (VK4TEC) <vk4tec at tech-software.net>