[Xastir] Change to RELAY digipeat function

[Tim Schall]

Erp...  I didn't mean to imply that SEA was doing that.  Only used it as an
example.

And SEA at least, is smart enough not to act on (again a thin air example)
SOMTN*,WIDE1-1

----- Original Message ----- 
From: "James Ewen" <jewen at shaw.ca>
To: <xastir at xastir.org>
Sent: Thursday, April 07, 2005 10:48 PM
Subject: Re: [Xastir] Change to RELAY digipeat function


> > Does it digipeat WIDE1-1 >ONLY< if it's the first thing unused in the
digi
> > string?  How would it handle something like 'SEA*,WIDE1-1'
>
> This is the one place where there's a chink in the armor... WIDE1-1 MUST
> ONLY be used as the first hop. SEA*,WIDE1-1 would activate all the home
> stations that have been reprogrammed from RELAY to WIDE1-1.
>
> If SEA is going to send out a path like above, it should do so like this:
>
> SEA*, WIDE2-1
>
> Same number of hops, but due to the WIDE2-1, it will not activate the home
> stations.
>
> James
> VE6SRV
>
>
> _______________________________________________
> Xastir mailing list
> Xastir at xastir.org
> https://lists.xastir.org/mailman/listinfo/xastir
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.5 - Release Date: 4/7/2005
>