[Xastir] Xastir and TM-D710A

[David Flood]

My first suggestion would be to make sure you are plugged into the PC/Comm jack.  It sounds like you've pluged into the Data jack instead and are triggering the PTT line on that jack.

>From looking at the online manual (and that's all I can afford right now) both jacks have the same number of outside pins so it would be easy to plug the same plug into both.  The PC/Comm jack adds a center pin for ground that isn't there on the Data jack.

Dave
KD7MYC

-----Original Message-----
>From: Russell Handorf <rhandorf at handorf.org>
>Sent: Dec 12, 2007 9:04 AM
>To: xastir at xastir.org
>Subject: [Xastir] Xastir and TM-D710A
>
>Greetings all,
>
>I'm trying to get my Kenwood TM-D710A and Xastir to work together. I
>followed the instructions for just a serial connection only (/dev/ttyS0)
>and start the port. My radio immediately begins to transmit *dead air*
>and doesnt stop until I remove the serial cable.