[Xastir] KISS setup help
Patrick Domack
patrickdk at patrickdk.com
Tue Aug 25 21:14:06 EDT 2009
I must be lucky :)
I have a KPC 3, with v5.0 and have run it for over a year, without a
reset and haven't had any kiss mode issues.
Quoting Tom Russo <russo at bogodyn.org>:
> On Mon, Aug 24, 2009 at 07:35:10PM -0700, we recorded a
> bogon-computron collision of the <archer at eskimo.com> flavor,
> containing:
>> On Mon, 24 Aug 2009, David Sprangers wrote:
>>
>> > . When I try connecting to the KPC3 with Serial KISS TNC interface, I am
>> > unable to view any incoming packets on the Display Packet Data window. The
>> > Interface Control window tells me the device is up, but no
>> incoming packets.
>> > When I connect to the KPC3 using a Serial TNC inferface, I am able to view
>> > incoming packers in the Display Packet Data window.
>>
>> Did you set the TNC into KISS mode first? You can't just switch one
>> end without switching the other end.
>
> And do be aware that the KPC-3 and KPC-3+ have a buggy KISS firmware. Once
> in a while, some condition or other will cause some sort of buffer overrun,
> and the TNC will start delaying outgoing packets. This condition is reset by
> a power cycle.
>
> I am running a KPC-3+ in KISS mode for my igate and WX station
> (http://www.bogodyn.org/blog/) and find that this problem surfaces every few
> days. I'm in the habit of checking my TNC log every morning and evening to
> see if the delayed packets are happening. I can do this easily since I'm
> using a timestamped packet format from Xastir (weather station with
> timestamp),
> and if I see my digipeated packets with a different timestamp than the packet
> I just transmitted, I know that the TNC is transmitting the previous packet
> I sent rather than the current one.
>
> If you have no real need for KISS operation, you're better off using
> the KPC-3
> in regular converse mode. That's not an option for me since I'm running
> more than just Xastir on the TNC. Ultimately I'll replace my TNC with one
> that does KISS better and move the KPC-3+ to some other function.
>
> --
> Tom Russo KM5VY SAR502 DM64ux http://www.swcp.com/~russo/
> Tijeras, NM QRPL#1592 K2#398 SOC#236
> http://kevan.org/brain.cgi?DDTNM
> In some cultures what I do would be considered normal.
> -- Ineffective daily affirmation
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
More information about the Xastir
mailing list