[Xastir] MFJ-1278 tnc setup in xastir

[Steve Rogers]

Hello, Basically all 3 models are the tnc-2, I just started my mfj-1270c yesterday and its works fine. You might want to check the interface>serial tnc>activate on startup and also allow transmitting tabs . The 9600 baud tab must be checked. You might want to check if your tnc is not in blp host mode or kiss mode. Your 8n1 might be checked as well. I used minicom on ubuntu to setup the /dev/ttyS0 at 9600 baud and 8n1. This might help your process with xastir.  Your tnc's are good units dont lose your faith yet. Steve kd5mkv

> From: n9io at hotmail.com
> To: xastir at lists.xastir.org
> Date: Wed, 15 Jul 2009 16:55:46 -0500
> Subject: [Xastir] MFJ-1278 tnc setup in xastir
> 
> 
> Hello group,
> 
> I am a new member to this group with a question.
> 
>  
> 
> I have installed xaster with andLinux.
> 
>  
> 
> TCPIP works fine.
> 
> My specific problem is how to setup for use with my MFJ-1278 tnc
> 
> or should I be looking at a different tnc?
> 
> I cannot seem to get it to work with this application.
> 
> I also own a MFJ-1274 and an older MFJ-1270.
> 
> I have been using the MFJ-1278 on UIView without issue for some time now.
> 
>  
> 
> Thankyou in advance.
> 
> Clay Melhorn N9IO Bonfield, IL
> Webmaster:
> KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
> ARRL (Central Division) http://www.central.arrl.org/
>  
>  
>  
> 
> 
> 
> 
> _________________________________________________________________
> Windows Live™ SkyDrive™: Get 25 GB of free online storage.
> http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir

_________________________________________________________________
Insert movie times and more without leaving Hotmail®. 
http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009