[Xastir] wx200d

[Chris Wilson]

Hello Everyone,

 

I was searching through the lists, and googling around, but haven't seem to
come across a solution for my problem with Xastir 1.9.5 on my Linux box with
my Oregon Scientific WMR968.

 

I'm running wx200d but when I try to "View/Own Weather Data" for my WX
station I get all zeros and some items with no data values at all. 

 

I have added a Interface as follows:

 

My wx200d command line is: 

/usr/local/sbin/wx200d -s /dev/ttyUSB0 -r -p 9753

 

Network WX:
WX Host: localhost

Port: 9753

Activate on Startup and Reconnect on Failure checked

Data type: auto

Rain Gauge: no correction

 

I have a WMR968 and wx200 displays just fine, ie;

[root at server-1 ~]# wx200

WX200 ff:            localhost:9753   9/ 5  3:12:41  

  1.3             Display:    Clock/0/0          Power: AC  Battery: ok 

             ---------- Outdoor -----------  ----------- Indoor -----------

Temperature: 17.4 C Hi 17.4 C  9/ 5  3:12    24.1 C Hi 24.1 C  9/ 5  3:06  

                    Lo 17.4 C  9/ 5  3:12           Lo 24.1 C  9/ 5  3:06  

   Humidity:   39 % Hi   39 %  9/ 5  3:12      54 % Hi   54 %  9/ 5  3:06  

                    Lo   39 %  9/ 5  3:12           Lo   54 %  9/ 5  3:06  

  Dew Point:    3 C Hi    3 C  9/ 5  3:12      14 C Hi   14 C  9/ 5  3:06  

                    Lo    3 C  9/ 5  3:12           Lo   14 C  9/ 5  3:06  

Wind Gust:054NE @  1.6 m/s    Wind Gust Hi:000 N @  3.9 m/s    9/ 5  3:12  

      Avg:054NE @  2.4 m/s      Wind Chill:  17 C   Lo:  14 C  9/ 5  3:12  

Rain Rate:    0 mm/h  Yesterday:    0 mm Total:    0 mm since  0/ 0  0:00  

Barometer: Steady at   980 hpa  1014 hpa sea; 12-24hr forecast: Sunny

 

My interface status is showing as "UP" for the network WX interface. 

 

Any thoughts anyone? Any help would be appreciated! 


Thanks a bunch!

 

Chris