[Xastir] How do I use a Tiny Trak 4 (TT4) with Xastir?

[Scott Evans]

The default baud speed for the TT4 is 19200,  Ok you will need to
specify in the TT4 AMODE KISS (the default is TEXT) ABAUD 19200 (it is
this by default) then in the interface within XASTIR select a serial
KISS TNC, 

For your radio setting the TXTWIST should be fine at its default setting
the main one to experiment with is the TXLEVEL this is your deviation
setting, set the variable pot to maximum and just use the software
setting of TXLEVEL, however if you prefer you can set the TXLEVEL to
maximum and simply use the pot (either way achieves the same!)

-- 
Scott Evans <scott at vk7hse.hobby-site.org>


--
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. 
If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the 
individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately 
by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified 
that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.