[Xastir] Xastir 2.0.1, OS X 10.6.5 and Kenwood THD72A

[Javier Henderson]

I can't get this combo to work.

With the radio plugged via USB into the computer, after loading the device drivers from http://silabs.com/, I can see output on ZTerm when packets are heard.

The devices created are /dev/tty.SLAB_USBtoUART and /dev/cu.SLAB_USBtoUART

I added a serial KISS TNC using /dev/cu.SLAB_USBtoUART, I can start the interface and status is UP, and I see Xastir sending data to the radio (at least it's logged in the tnc.log file) but nothing is transmitted.

When packets are heard nothing is written to the log file, though the display on the radio shows the message or position report, etc.

Not sure where to go from here. I never used a TNC with Xastir, just Internet interfaces.

73,
-jav w6vms