[Xastir] soundmodem stops decoding

[Grant Siebrecht]

I forgot to mention that I have the same problem when using AX.25 interfaces.
Grant

-----Original Message-----
From: xastir-bounces at lists.xastir.org on behalf of Jeremy McDermond
Sent: Mon 2/15/2010 9:20 PM
To: Xastir - APRS client software discussion
Cc: xastir at xastir.org
Subject: Re: [Xastir] soundmodem stops decoding
 
On Feb 15, 2010, at 10:17 PM, Grant Siebrecht wrote:

> I'm running Ubuntu 9.10, fresh install.
> Installed xastir and soundmodem by using apt-get
> 
> I can get soundmodem running and decoding packets; however when I start xastir and turn on the serial kiss tnc interface the decoding by soundmodem stops, packets stop scrolling in the terminal window.
> The TNC interface starts but neither xastir or soundmodem appears to continue to decode packets.
> 
> Has anyone else had this problem or have any ideas where to look.
> I tried running soundmodem and xastir as root and I have no luck.

This doesn't help you a lot, but I found that I had a lot better luck with soundmodem when running it under the Linux AX.25 subsystem rather than in KISS mode.  It's been long enough ago that I don't remember the exact issues.  Admittedly, this wasn't with Xastir driving it (it runs the CRVLS digipeater/iGate on javAPRSSrvr).

> Grant

--
Jeremy McDermond (NH6Z)
Xenotropic Systems
mcdermj at xenotropic.com



_______________________________________________
Xastir mailing list
Xastir at lists.xastir.org
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir