[Xastir] {Dangerous Content?} RE: soundmodem stops decoding

[Jeremy McDermond]

On Feb 16, 2010, at 3:31 PM, John Ronan wrote:

> Evening,
> I don't understand what the two options are for after the broadcast  
> flag.  That's where it differs from my config.

IIRC, those are the options when you're running it in KISS mode.  One  
gives the file of the TTY file that it's going to spew out to, and the  
other is whether the file will be unlinked upon termination of the  
daemon.

They're only applicable if you're in KISS mode.  When you're in AX25/ 
MKISS mode, it doesn't use those parameters and uses the "ifname"  
fields and such.

>
> Regards
> John
>
> On 16 Feb 2010, at 18:52, Grant Siebrecht wrote:
>
>> Warning: This message has had one or more attachments removed
>> Warning: (not named).
>> Warning: Please read the "Hollyead-NET-Attachment-Warning.txt"  
>> attachment(s) for more information.
>>
>> Here is my soundmodem.conf file.
>>
>> <?xml version="1.0"?>
>> <modem>
>> <configuration name="kiss">
>>   <channel name="Channel 0">
>>     <mod mode="afsk" bps="1200" f0="1200" f1="2200" diffenc="1"/>
>>     <demod mode="afsk" bps="1200" f0="1200" f1="2200" diffdec="1"/>
>>     <pkt mode="KISS" ifname="sm0" hwaddr="" ip="10.0.0.1"  
>> netmask="255.255.255.0" broadcast="10.0.0.255" file="/dev/ 
>> soundmodem0" unlink="1"/>
>>   </channel>
>>   <chaccess txdelay="150" slottime="100" ppersist="40" fulldup="0"  
>> txtail="10"/>
>>   <audio type="soundcard" device="/dev/dsp" halfdup="1"/>
>>   <ptt file="none"/>
>> </configuration>
>> </modem>
>> -Grant
>>
>> -----Original Message-----
>> From: xastir-bounces at lists.xastir.org on behalf of John Ronan
>> Sent: Tue 2/16/2010 2:53 AM
>> To: Xastir - APRS client software discussion
>> Subject: Re: [Xastir] soundmodem stops decoding
>>
>> Could you email me the config?
>>
>> I'm running soundmodem at home for years now, actually check it  
>> first against
>> http://www.ei7ig.org/sat.html
>>
>> I run it as root in a terminal window with soundmodem -v 9
>>
>> Regards
>> de John
>> EI7IG
>> On 16 Feb 2010, at 03:17, Grant Siebrecht wrote:
>>
>>> I'm running Ubuntu 9.10, fresh install.
>>> Installed xastir and soundmodem by using apt-get
>>>
>>> I can get soundmodem running and decoding packets; however when I  
>>> start xastir and turn on the serial kiss tnc interface the  
>>> decoding by soundmodem stops, packets stop scrolling in the  
>>> terminal window.
>>> The TNC interface starts but neither xastir or soundmodem appears  
>>> to continue to decode packets.
>>>
>>> Has anyone else had this problem or have any ideas where to look.
>>> I tried running soundmodem and xastir as root and I have no luck.
>>> Grant
>>> _______________________________________________
>>> Xastir mailing list
>>> Xastir at lists.xastir.org
>>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>>
>> _______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>>
>> <Hollyead-NET-Attachment- 
>> Warning.txt>_______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>