[Xastir] Kenwood TM-D710 TNC Configuration question

[Dave H]

David
Getting a 403 error on the .sh file in 2. You may need to tar it up.

Dave H G0CER

On 28 November 2010 22:13, David A. Ranch <xastir at trinnet.net> wrote:

>
> Hello Joel,
>
> I have a D710 running here in KISS most with Xastir and I've written up the
> whole process of getting the code, compiling, and configuring it on Centos5
>
> 1.  Check out Sections 7-9 of my HamPacketizing-Centos5 doc  (need to
> HTMLize this doc still)
>
>     http://www.trinityos.com/HAM/index-ham.html -->
> http://www.trinityos.com/HAM/CentosDigitalModes/hampacketizing-centos5.txt
>
> 2. See my packetrig.sh startup script on how I initialize the radio, AX.25
> on Linux, and Xastir
>
>
> http://www.trinityos.com/HAM/CentosDigitalModes/usr/local/sbin/packetrig.sh
>
> --David
>
>
>
>
>
> Joel Kershner wrote:
>
>> I have been searching the web for answer to this question with not
>> much luck, a whole lot of questions and not a lot of answers.
>>
>> Some how I think its more complex than setting Xastir to use a config
>> file with the configuration string "KISS ON".
>>
>> During my research I found some one (Patrik Stromdahl, SM7NWJ.) who
>> claimed that they had a working config file for the D710.
>>
>> # $Id: tnc-startup.d710,v 1. 2009/06/03 10:28:58 sm7nwj Exp $
>> #
>> # Patrik Stromdahl, SM7NWJ.
>> #
>> # TNC Init file for KENWOOD TM-D710.
>> #
>> #Don't send CONTROL-C before this line
>> ##META <no-ctrl-c>
>> ##META <ctrl-c>
>> ##META <ctrl-c>
>> ##META <ctrl-c>
>> TC 1
>> ##Pause for one second
>> ##META <delay>
>> ##META <delay>
>> ##META <no-ctrl-c>
>> # You will have to select:
>> # TN 2,0 for band A
>> # TN 2,1 for band B
>> # on line below
>> TN 2,0
>> # Pause for one second, so that the TNC finishes it's startup.
>> ##META <delay>
>> ##META <delay>
>> # It's correct to duplicate ECHO and BEACON commands below.
>> ECHO OFF
>> ##META <delay>
>> BEACON EVERY 0
>> ##META <delay>
>> ECHO OFF
>> ##META <delay>
>> BEACON EVERY 0
>> HBAUD 9600
>>
>> But when I init the TNC using this it displays the firmware version
>> information and I dont get any TNC information into Xastir.
>>
>> When I use a terminal I see APRS traffic just fine.
>>
>> Configuring it as a straight KISS TNC hasnt worked well either.
>>
>> Suggestions?
>>
>> -=- Joel Kershner -=-
>> KD0HKI
>> Cowtown Computer Congress Kansas City ARC KD0IXQ
>> _______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>>
>>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>



-- 
73s Dave H
G0CER - KJ4QAO (now with added 'Extra' class)
(also G6VSG)
http://www.eQSL.cc/Member.cfm?G0CER
http://g0cer.blogspot.com