[Xastir] install question

[Rob Neece]

Thanks to everyone.  The instructions do indeed work for MEPIS 8.5.  i 
had for gotten about all the supporting software that was needed and was 
trying to get away with a pretty simple update.  Alls well that ends 
well.  xastir is running.

Rob

Lee Bengston wrote:
> On Sun, Jan 2, 2011 at 12:07 PM, Curt, WE7U <curt.we7u at gmail.com> wrote:
>   
>> On Sat, 1 Jan 2011, Rob Neece wrote:
>>
>>     
>>> I just changed my MEPIS installation to 8.5 from 8.0 and kept my /home
>>> partition.  This hasn't worked out too badly, and things are getting
>>> straightened out.  I finally got around to considering what to do about
>>> xastir today.
>>>       
>> Here are the instructions for 8.0, old, but probably mostly
>> applicable.  Note that there are apt-get commands for getting the
>> build environment set up.  Make sure you've run those.
>>
>>  http://www.xastir.org/wiki/HowTo:MEPIS_8.0
>>     
>
> The instructions above cover both versions 8.0 and 8.5.  The gcc error
> is probably due to the lack of the 'build-essential' package, which
> should be the first one listed to be installed in the instructions.
>
> Lee - K5DAT
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
>
>