[Xastir] ax25 question

[Steve Rogers]

Okay I will do just that thanks kd5mkv steve

> Date: Wed, 27 Jul 2011 14:13:50 -0400
> From: lee.bengston at gmail.com
> To: xastir at lists.xastir.org
> Subject: Re: [Xastir] ax25 question
> 
> On Wed, Jul 27, 2011 at 12:27 PM, Steve Rogers <kd5mkv at hotmail.com> wrote:
> >
> > I have removed aprsd and have started ax25.up before starting xastir. And the device remains down. I use ax25.down and reboot before the xastir device port will work again. Stev kd5mkv
> 
> OK, so after re-booting, the xastir device port works.  Did you put a
> script similar to your ax25.up in /etc/init.d/ as shown in the wiki?
> If yes, then you are done - no need to run ax25.up manually before
> starting xastir.  The script in etc/init.d is designed to
> automatically set up the ax25 interface instead of using ax25.up.
> 
> If you do not have a start-up script in /etc/init.d, I suspect your
> xastir device port is not ax25 given it appears to be working without
> the ax25 interface being set up.
> 
> My ax25 interface in Xastir looks like this in the interface control box:
> 
> Device  1     UP     AX25 TNC aprs
> 
> Regards,
> Lee
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir