[Xastir] ax25 question

[Steve Rogers]

I can use a kpc3 or tnc2,I believe some issues of the kpc3 sending gibberish after a period of time.I encoutered problems running the thru a serial adapter, it stops communicating with Xastir after a period of time. I will try using a serial port later today. steve kd5mkv
> Date: Wed, 27 Jul 2011 21:37:47 -0400
> From: lee.bengston at gmail.com
> To: xastir at lists.xastir.org
> Subject: Re: [Xastir] ax25 question
> 
> On Wed, Jul 27, 2011 at 7:58 PM, Steve Rogers <kd5mkv at hotmail.com> wrote:
> >
> > The executable resides in the file  /usr/local/bin/xastir  but have not able to get ax25tnc to work on ubuntu 10.4, which means I will give it a shot another machine.
> > I running Ubuntu i386 version on a Hp AMD 64 with xastir-2.0.1 from CVS. thanks Kd5mkv
> 
> I was never able to get one of my two usb to serial adapters to work
> as an ax25 interface.  I tried starting all over with the one that
> didn't work previously, and still no dice.  I found as long as it was
> plugged into the TNC, the kissattach command wouldn't work - I forget
> the exact error message.  If I unplugged it from the TNC, I could get
> the initial commands to work without errors, but then as soon as I
> plugged it in and tried to test, I would get errors.  Perhaps you are
> encountering something similar with the TNC-X.
> 
> I was able to get AX.25 to work with Xastir in Ubuntu 11.04, but on
> that box I was using a 'real' serial port (ttyS0).  That computer
> 'quad boots' LMDE, Ubuntu 11.04, Mepis 11.0, and Aptosid (latest
> version).  I was able to get AX.25 to work on the first 3 - never
> tried it on Aptosid.
> 
> Regards,
> 
> Lee - K5DAT
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir