[Xastir] No stations

[Clay Jackson]

D'Oh!    Thank you!

Clay
N7QNM


-----Original Message-----
From: xastir-bounces at lists.xastir.org
[mailto:xastir-bounces at lists.xastir.org] On Behalf Of Brett Friermood
Sent: Thursday, March 6, 2014 11:08 AM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] No stations

The m/100 filter references your position. Without the server ever knowing
your position (you have transmit disabled) it cannot send information back
for stations within the defined range around your station.

Since you want to receive only, using an r/.... filter will provide the same
filtering but as a range around a defined latitude/longitude reference.

Brett KQ9N


On Thu, Mar 6, 2014 at 11:29 AM, Clay Jackson <n7qnm-lists at nwlink.com>
wrote:
> I just built up a TNC-Pi and have that set up running a Digi/iGate 
> combination (at least I think it's configured correctly) as SSID PROSSR.
> Last nite, I turned off the TNC interface on my Xastir instance.   The
only
> interface I'm running now is to firenet.us, port 14580, with transmit 
> disabled.
>
> The problem is that all I'm seeing is my station (N7QNM, no SSID) and 
> WX-ALERTS; NO other stations (including the beacon from the Pi/TNC).  
> My filter is set to:
> m/100  e/WE7U-WX
>
> If I use findu or aprs.fi; I can see other stations around me, including
> one's I'm digi'ing and igating.   I'm sending my igate packets to
noam.aprs2
>
> I'm sure I've done something stupid; can't figure it out :-)
>
> Anyone got any suggestions on at least where to look?
>
> Thanks!
>
> Clay Jackson
>
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
_______________________________________________
Xastir mailing list
Xastir at lists.xastir.org
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir