[Xastir] DB->Put/Get

[Brian Marble]

Lee and Tom,

You were correct. This solved the problem. I am now running 2.05 direct from
the CVS. Cache is working great, not error messages at the terminal or in
the logs.

Thank you,
Brian Marble
KG7AFQ

-----Original Message-----
From: xastir-bounces at lists.xastir.org
[mailto:xastir-bounces at lists.xastir.org] On Behalf Of Lee Bengston
Sent: Saturday, March 29, 2014 3:10 PM
To: Xastir - APRS client software discussion
Subject: Re: [Xastir] DB->Put/Get

On Sat, Mar 29, 2014 at 2:37 PM, Brian Marble <brianmarble at landez.com>wrote:

> All,
>
> Map Caching seems to be not working.
>
> When running Xastir 2.0.4 I am receiving the "DB->put:  method not 
> permitted before method's open handle" and it's sister "DB->get:  
> method not permitted before method's open handle".
>
> If you are using the 2.04 tarball from Sourceforge, it is old enough
(early December 2012) that it does not include the updates that allow Xastir
to work with Berkely DB versions 5.0 and above.  If you build the current
2.05 version from CVS, map caching should work.

>
> I have tried many ideas to change the build, in regards to the libdb 
> libraries. Then I do a completed build again.  My current build is 
> with libdb-5.1.so. I have the libdb-5.1:amd64  libdb-5.1-dev 
> installed. No other libdb versions are showing in dkpg 
> --get-selections.
>
> Where else should I be looking to determine the cause of this problem? 
> Is there a known solution to this problem?
>
>
Regards,
Lee - K5DAT
_______________________________________________
Xastir mailing list
Xastir at lists.xastir.org
http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir