[Xastir] KPC-3 config file

[Danny]

Thanks Tom ...

I used your examples and am busy building my own startup file.

Have a nice day

Danny

On Dec 10 15, Tom Russo :
> To: Xastir - APRS client software discussion <xastir at xastir.org>
> Date: Thu, 10 Dec 2015 00:22:44 -0700
> From: Tom Russo <russo at bogodyn.org>
> Subject: Re: [Xastir] KPC-3 config file
> User-Agent: Mutt/1.5.24 (2015-08-30)
> X-BeenThere: xastir at lists.xastir.org
> 
> On Thu, Dec 10, 2015 at 08:29:44AM +0200, we recorded a bogon-computron collision of the <mynixmail at gmail.com> flavor, containing:
> > Hi guys,
> > 
> > Just want to know which startup file I must use for a KPC-3(non-plus) TNC. Also,
> > is there someone that can provide me with one of their KPC-3 startup files.
> 
> If you don't get a response from someone that has a KPC-3 (non-plus) in Xastir
> operation, you can easily adapt the existing tnc-startup.kpc3 file (which is
> for the 3+) just by removing the 3+-specific commands from it.
> 
> This should do the trick.  Cut/paste everything between the "#------" lines
> into a file in the same directory as the other tnc-startup files, and
> point Xastir at it.  This should be enough to use the old KPC-3 with Xastir.
> I have no KPC-3 to test on, but I did look on line at a KPC-3 manual just now
> to find the commands that existed in that model.
> 
> I did something similar back when I first got into using Xastir with a very
> old KPC-2.  In fact, you'll find that "tnc-startup.kpc2" bears quite the
> resemblance to the following.
> 
> #------
> int terminal
> HID off
> B E 0
> DIGI on
> ECho off
> FILT off
> FLow off
> FUll off
> HEA off
> LFadd off
> LFSup ON
> AUTOLF off
> MCOM off
> MON ON
> MResp OFF
> MRPt on
> MSTamp off
> NEWmode off
> #PACLen 128
> PASSALL off
> #
> # Important!  Monitor only PID 0xf0 packets:
> PID off
> #
> SCR 0
> #-----
> 
> -- 
> Tom Russo    KM5VY   SAR502   DM64ux          http://www.swcp.com/~russo/
> Tijeras, NM  QRPL#1592 K2#398  SOC#236        http://kevan.org/brain.cgi?DDTNM
>  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z] [n-z][a-m]
> 
>  
> 
> 
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir