[Xastir] Device 0 errors with Xastir-Pi

[Steve Grantham]

Not fixed yet. Status quo. The Device 0 port is present at /dev/ttyAMA0 and is working in transmit direction before the random Device 0 Error appears. I will dig into it a bit further.

> On Jul 27, 2017, at 8:16 PM, Stephen Shankle <km4alt at gmail.com> wrote:
> 
> check your edits made as per tnc-pi instructions. And make sure xastir is
> looking at the right port /dev/ttyAMA0
> 
>> On Jul 27, 2017 6:30 PM, "Steve Grantham" <aprs.aa5sg at gmail.com> wrote:
>> 
>> I opened a terminal, ran top, and saw a single instance at the top. When I
>> closed Xastir on my desktop, it no longer appeared in top. When I reopened
>> Xastir from the desktop, there was again only the single instance. Thanks
>> for the input!
>> 
>>>> On Jul 25, 2017, at 7:32 PM, Curt, WE7U <curt.we7u at gmail.com> wrote:
>>>> 
>>>> On Tue, 25 Jul 2017, Steve Grantham wrote:
>>>> 
>>>> I am getting Device 0 errors for no apparent reason. And I don't seem
>> to be receiving data packets in Xastir, even though the yellow LED
>> illuminates when the radio receives packet transmissions. This is a Pi3
>> with a TNC-Pi (the newer version TNC-Pi with mounting holes..) The TNC-Pi
>> and transceiver are transmitting packets that do get digipeated though...
>> Any ideas about this?
>>> 
>>> Kill Xastir, then check whether other Xastir processes are still
>> running. Sounds like you might have gotten two running at once.
>>> 
>>> --
>>> Curt, WE7U.        http://we7u.wetnet.net
>>> Windows ate my homework!
>>> _______________________________________________
>>> Xastir mailing list
>>> Xastir at lists.xastir.org
>>> http://xastir.org/mailman/listinfo/xastir
>> _______________________________________________
>> Xastir mailing list
>> Xastir at lists.xastir.org
>> http://xastir.org/mailman/listinfo/xastir
>> 
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir