[Xastir] Device 0 errors with Xastir-Pi

[Stephen Shankle]

check your edits made as per tnc-pi instructions. And make sure xastir is
looking at the right port /dev/ttyAMA0

On Jul 27, 2017 6:30 PM, "Steve Grantham" <aprs.aa5sg at gmail.com> wrote:

> I opened a terminal, ran top, and saw a single instance at the top. When I
> closed Xastir on my desktop, it no longer appeared in top. When I reopened
> Xastir from the desktop, there was again only the single instance. Thanks
> for the input!
>
> > On Jul 25, 2017, at 7:32 PM, Curt, WE7U <curt.we7u at gmail.com> wrote:
> >
> >> On Tue, 25 Jul 2017, Steve Grantham wrote:
> >>
> >> I am getting Device 0 errors for no apparent reason. And I don't seem
> to be receiving data packets in Xastir, even though the yellow LED
> illuminates when the radio receives packet transmissions. This is a Pi3
> with a TNC-Pi (the newer version TNC-Pi with mounting holes..) The TNC-Pi
> and transceiver are transmitting packets that do get digipeated though...
> Any ideas about this?
> >
> > Kill Xastir, then check whether other Xastir processes are still
> running. Sounds like you might have gotten two running at once.
> >
> > --
> > Curt, WE7U.        http://we7u.wetnet.net
> > Windows ate my homework!
> > _______________________________________________
> > Xastir mailing list
> > Xastir at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>