[Xastir] Xastir wit Raspbeery Pi model # and pi-tnc

[Steve Rogers]

Did you use setparams script? The tnc needs to set to kiss mode settings. I built one and parameters never stayed stable even though the test points were checjed good.
Steve kd5mkv

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Xastir <xastir-bounces at lists.xastir.org> on behalf of Tom Henderson <Tom at Henderson4.us>
Sent: Monday, January 21, 2019 11:32:30 AM
To: xastir at lists.xastir.org
Subject: Re: [Xastir] Xastir wit Raspbeery Pi model # and pi-tnc

Hello!

When you say you installed it on the RPi, does that include the steps to
enable the serial port in the section of the manual on configuring the
Rasperry Pi?

https://tnc-x.com/TNCPi.pdf

After that, the TNC should work on either /dev/serial0 or /dev/ttyAMA0

Tom Henderson

On 1/21/19 10:58 AM, Jim Darrough wrote:
> Hi Guys.
>
>     I need some help. I built the pi-tnc (version 2.0), and installed
> it on a brand new RPi model 3. I installed Xastir, which works fine
> over the internet, but I can't get the TNC to talk to the radio. I
> never see any led's light up, so I fear I may either have
> misconfigured the Pi, or maybe the Xastir settings. I am trying to set
> up an I-gate and am using a maxtrac programmed for 144.39.
>
>     ANyone got time to help an old guy?
>
> 73 Jim Darrough, KI7AY EM25pd
>
_______________________________________________
Xastir mailing list
Xastir at lists.xastir.org
http://xastir.org/mailman/listinfo/xastir