[Xastir] [Xastir-dev] ATTENTION: Preparing for next release: Please thrash on the code

Curt Mills curt.we7u at gmail.com
Mon May 27 11:52:53 PDT 2019


Fine by me. I can do all the announcements.

On Mon, May 27, 2019, 10:07 AM Tom Russo <russo at bogodyn.org> wrote:

> On Thu, May 23, 2019 at 01:05:53PM -0600, we recorded a bogon-computron
> collision of the <russo at bogodyn.org> flavor, containing:
> > On Thu, May 23, 2019 at 07:15:52AM -0700, we recorded a bogon-computron
> collision of the <curt.we7u at gmail.com> flavor, containing:
> > > Anyone else have any reports, good or bad?
> > >
> > > FWIW: For the types of things I do the latest code has been stable for
> me.
> > >
> > > We're getting close to a release and Tom will most likely be the one
> doing
> > > it. No target date has been mentioned. If we run into any nasty bugs
> that
> > > might delay.
> >
> > Let's set a date right now.  I can set aside the time to do the release
> > on only a few days in the upcoming weeks (it doesn't take long, but it's
> > a process that takes some attention, and is documented in
> README.developers.md).
> >
> > The days I could do it are:
> >   Friday, 31 May
> >   Friday, 14 June
> >   Sometime on the weekend of 21-23 June.
>
> Can we pick one?  I propose we just rip off the band-aid and do it
> Friday 31 May.  I can take care of the git work if you'll handle doing all
> the various announcements.
>
> > I think that we are already at a point where there has been sufficient
> time
> > to shake out the code on master, and we could release today if we wanted
> > to.  Next friday is the earliest I have the opportunity to spend on it.
> >
> > If someone else wanted to try out the release process, it's all
> documented
> > in gory detail in README.developers.md, and if followed precisely would
> > produce a new release that would be ready (down to file names of
> tarballs)
> > to slot into the package creation processes various distros use, just by
> > changing the version number.  Or pick a date and I'll do it then.
> >
> > > On Fri, May 17, 2019 at 6:16 PM Lee Bengston <lee.bengston at gmail.com>
> wrote:
> > >
> > > > I've played with it some and and have not found any issues. I put
> together
> > > > a BPQ packet node in January, and I haven't fully back-filled what I
> had
> > > > "stolen" from aprs, so testing capability is fairly limited.  From
> what I
> > > > can tell, though, it's nice and stable.
> > > >
> > > > I do have a few questions about the source ( yeah, always one in the
> crowd
> > > > :-) )
> > > >
> > > > - In dlm.c noticed references to "curl-multi" and evidently the
> capability
> > > > to leverage parallel downloading of map tiles as supported by
> libcurl. Is
> > > > whether or not that is supported in our platform based on what
> version of
> > > > curl is installed?
> > > >
> > > > - now that dlm.c handles downloading tiles, is there anything left in
> > > > tile_mgmnt.c that is still needed or could tile_mgmnt.h and
> tile_mgmnt.c be
> > > > removed?  It seems at a minimum the "getOneTile" portion of
> tile_mgmnt.c is
> > > > no longer needed.
> > > >
> > > > Looks like you guys are doing a lot of cleanup in this release, so
> brought
> > > > that up just in case there's some stuff there that could be
> streamlined a
> > > > bit.
> > > >
> > > > Fyi, my Odroid XU4 (arm based) beats the pants off my Intel Celeron
> based
> > > > laptop in terms of map download speed.  Both are on Ubuntu 18.04
> with the
> > > > MATE desktop. Am wondering if the fact that the XU4 has an octa-core
> cpu
> > > > makes a difference with respect to curl-multi.
> > > >
> > > > The cleaner compiling is very noticeable, and the earlier note about
> newer
> > > > compilers spitting out more warnings matches what I saw.  Compiling
> is
> > > > cleaner in Debian Stretch and Ubuntu 16.04 than it is in Ubuntu
> 18.04, but
> > > > it still builds fine.  (And even in Ubuntu 18.04 the new code still
> > > > compiles a lot cleaner that the older code did)
> > > >
> > > > Thanks,
> > > >
> > > > Lee
> > > > K5DAT
> > > >
> > > >
> > > > On Thu, May 9, 2019 at 9:57 AM Curt Mills <curt.we7u at gmail.com>
> wrote:
> > > >
> > > > > We're planning to do a release within a few weeks. It might be as
> few as
> > > > 2
> > > > > weeks.
> > > > >
> > > > > Please check out / compile / thrash on the latest Github Xastir
> code.
> > > > Find
> > > > > anything that broke with our latest code fixes. Exercise all types
> of
> > > > > interfaces, messaging, bulletins, weather stations, tracking,
> following
> > > > > stations, maps, etc. Anything you can think of.
> > > > >
> > > > > The latest code compiles much cleaner and a lot of fixes went in
> to make
> > > > > that possible. We'd like this release to function well, so
> whatever you
> > > > can
> > > > > do to exercise the code would be most appreciated.
> > > > >
> > > > > If you find a bug or odd operation, report it here:
> > > > >
> > > > >   https://github.com/Xastir/Xastir/issues
> > > > >
> > > > > Thanks!
> > > > >
> > > > > --
> > > > > Curt, WE7U        http://we7u.wetnet.net
> > > > > http://www.sarguydigital.com
> > > > > _______________________________________________
> > > > > Xastir mailing list
> > > > > Xastir at lists.xastir.org
> > > > > http://xastir.org/mailman/listinfo/xastir
> > > > >
> > > > _______________________________________________
> > > > Xastir mailing list
> > > > Xastir at lists.xastir.org
> > > > http://xastir.org/mailman/listinfo/xastir
> > > >
> > >
> > >
> > > --
> > > Curt, WE7U        http://we7u.wetnet.net
> http://www.sarguydigital.com
> > > _______________________________________________
> > > Xastir mailing list
> > > Xastir at lists.xastir.org
> > > http://xastir.org/mailman/listinfo/xastir
> >
> > --
> > Tom Russo    KM5VY
> > Tijeras, NM
> >
> >  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z]
> [n-z][a-m]
> >
> > _______________________________________________
> > Xastir-dev mailing list
> > Xastir-dev at lists.xastir.org
> > http://xastir.org/mailman/listinfo/xastir-dev
>
> --
> Tom Russo    KM5VY
> Tijeras, NM
>
>  echo "prpv_a'rfg_cnf_har_cvcr" | sed -e 's/_/ /g' | tr [a-m][n-z]
> [n-z][a-m]
>
> _______________________________________________
> Xastir mailing list
> Xastir at lists.xastir.org
> http://xastir.org/mailman/listinfo/xastir
>


More information about the Xastir mailing list